Furnace Repair in Clovis
Get fast, fair pricing from licensed local pros. Typical Clovis cost: $100 – $300 installed.
- Flame sensor
- $100 – $300
- Igniter
- $175 – $550
- Blower motor
- $500 – $1.9k
- Control board
- $375 – $1k
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Clovis repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair in Clovis, California, typically costs between $90 and $250 for a diagnostic visit, with common repairs like flame sensor replacement ranging from $100 to $300 and blower motor replacement from $500 to $1,850. Because most homes were built around 1994 and many use gas heating, older systems may require more frequent repairs. Clovis is in a mild Mediterranean climate with moderate cooling demand, so heat pumps are often a strong fit for year-round comfort, but furnace repairs still matter for winter heating. Local permits are required for most repairs involving gas or electrical work, and California's Title 24 mandates Manual J load calculations and HERS-verified duct leakage testing on changeouts. The federal 25C tax credit offers up to $2,000 for qualifying heat pumps and up to $600 for high-efficiency central AC, which can offset upgrade costs.
- Diagnostic / service callOften credited toward the repair$90 – $250
- Flame sensor or thermocoupleCommon no-heat cause on gas units$100 – $300
- Hot-surface igniterFurnace clicks but won’t light$175 – $550
- Blower motorNo airflow / weak airflow$500 – $1,850
- Heat exchangerCracked exchanger often means replace$1,850 – $4,300+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Clovis
U.S. Census ACS- Households
- 48,243
- Homeowners
- 26,697
- 64% own
- Median home value
- $420,700
- Median income
- $98,554
- Median home built
- 1994
- Housing units
- 41,523
With a median home built in 1994, many Clovis AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Clovis?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Clovis.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Clovis
Given California’s mild (mediterranean), hot-dry inland climate and gas heating, high-seer2 heat pump is the sensible default for most Clovis homes. A pro can confirm the right size and system for your home with a load calculation.
Sources: Southwest Region SEER2 New Efficiency Standards · TECH Clean California Single Family Incentives · EIA California State Energy Data
What Clovis code requires
Installing or replacing an HVAC system in Clovis follows California rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum14.3 SEER2 (Southwest, <45k BTU)
Federal Southwest-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRequired (Manual J)
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
CA Title 24 requires HERS-verified duct leakage testing and Manual J sizing on most AC/furnace changeouts
Sources: Southwest Region SEER2 New Efficiency Standards · TECH Clean California Single Family Incentives · EIA California State Energy Data
Not sure which rules and rebates apply to your home?
A licensed Clovis pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Clovis
California heating is mostly gas, which shapes the money back:
- State~$1,000 per system (up to 2 systems / $2,000 per home), market-rateTECH Clean California - Single Family Heat Pump HVAC Incentive →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Clovis, explained.
What influences furnace repair pricing in Clovis
Repair costs vary based on the part needed, labor rates, and whether a permit is required. In Clovis, older homes (median built 1994) may have harder-to-find parts or corroded components. The mild climate means furnaces run less often, but when they fail, emergency service calls may cost more. California's stricter energy codes (Title 24) can add to labor time for duct testing or load calculations. The median household income of $98,554 supports mid-range service pricing, but competition among HVAC companies helps keep costs reasonable.
Common furnace problems in Clovis
Flame sensor failure
A dirty or faulty flame sensor is a frequent issue in Clovis homes, causing the furnace to ignite then shut off. Cleaning or replacement costs $100–$300.
Igniter malfunction
The igniter can crack or wear out, especially in older furnaces. Replacement runs $175–$550, and a diagnostic fee applies.
Blower motor issues
A failing blower motor reduces airflow and efficiency. Replacement costs $500–$1,850, common in 30-year-old systems.
What to expect during a furnace repair in Clovis
A technician will first diagnose the issue, charging a $90–$250 diagnostic fee. They will inspect the furnace, check for gas leaks, test the heat exchanger, and measure airflow. If a part needs replacement, they will provide an upfront cost estimate. For repairs requiring a permit, they will pull one with the city of Clovis. The job typically takes 1–3 hours, and the technician will ensure the system meets California's safety and efficiency standards.
Furnace Repair FAQs — Clovis
Yes, California requires a mechanical permit for most furnace repairs involving gas, electrical, or ductwork changes. Your HVAC contractor should pull the permit and include the cost in the estimate.
Furnace Repair near Clovis
Get a furnace repair quote.
No heat? Compare licensed local pros fast.