Furnace Repair in Sunrise
Get fast, fair pricing from licensed local pros. Typical Sunrise cost: $80 – $250 installed.
- Flame sensor
- $80 – $250
- Igniter
- $150 – $450
- Blower motor
- $400 – $1.4k
- Control board
- $300 – $800
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Sunrise repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair in Sunrise, Florida, typically costs between $80 and $3,400 depending on the part and labor. With most homes built around 1982, older systems may need more frequent repairs. Florida's hot-humid climate means most homes use heat pumps for heating, so furnace repair often involves heat pump components. Local permits are required for most repairs, and a diagnostic fee of $75–$200 is standard.
- Diagnostic / service callOften credited toward the repair$75 – $200
- Flame sensor or thermocoupleCommon no-heat cause on gas units$80 – $250
- Hot-surface igniterFurnace clicks but won’t light$150 – $450
- Blower motorNo airflow / weak airflow$400 – $1,450
- Heat exchangerCracked exchanger often means replace$1,450 – $3,400+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Sunrise
U.S. Census ACS- Households
- 38,604
- Homeowners
- 25,804
- 63% own
- Median home value
- $296,100
- Median income
- $66,001
- Median home built
- 1982
- Housing units
- 41,245
With a median home built in 1982, many Sunrise AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Sunrise?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Sunrise.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Sunrise
Given Florida’s hot-humid climate and heat-pump heating, high-seer2 heat pump is the sensible default for most Sunrise homes. With a long, hard cooling season here, stepping up the SEER2 tier pays back through lower summer bills. A pro can confirm the right size and system for your home with a load calculation.
Sources: Duke Energy Florida HVAC Replacement Rebate · SEER2 Southeast Region Standards · EIA Florida State Energy Profile
What Sunrise code requires
Installing or replacing an HVAC system in Sunrise follows Florida rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum14.3 SEER2 (Southeast, <45k BTU)
Federal Southeast-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRequired (Manual J)
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Florida Building Code requires hurricane/high-wind tie-downs and anchoring for outdoor condenser/heat-pump units.
Sources: Duke Energy Florida HVAC Replacement Rebate · SEER2 Southeast Region Standards · EIA Florida State Energy Profile
Not sure which rules and rebates apply to your home?
A licensed Sunrise pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Sunrise
Florida heating is mostly heat-pump, which shapes the money back:
- StateUp to $1,000 (heat pump/strip-heat upgrade; $300 AC, $500 heat-pump upgrade)Duke Energy Florida HVAC Replacement Rebate →
State or utility program — verify eligibility before you buy.
- State$200 instant credit (SEER2 15.3+ via participating contractor)FPL High-Efficiency AC/Heat Pump Instant Rebate →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Sunrise, explained.
What affects repair costs in Sunrise?
Prices vary by the part replaced: flame sensor ($80–$250), igniter ($150–$450), blower motor ($400–$1,450), control board ($300–$800), or heat exchanger ($1,450–$3,400+). Labor rates reflect local costs and permit fees. Older homes may have outdated systems that require more labor. Florida's building code also requires hurricane tie-downs for outdoor units, which can add to repair time.
Common furnace repairs in Sunrise
Flame sensor failure
A dirty or faulty flame sensor is a frequent issue, causing the furnace to shut off after ignition. Cleaning or replacement costs $80–$250.
Igniter problems
A broken igniter prevents the furnace from starting. Replacement runs $150–$450.
Blower motor malfunction
The blower motor can fail due to age or overheating, leading to poor airflow. Repair or replacement costs $400–$1,450.
What to expect during a furnace repair
A technician will first diagnose the issue for a fee of $75–$200. They will check the thermostat, power supply, and key components. For repairs requiring a permit, the technician will pull one with the city. In Florida, outdoor units must be secured against high winds, so the technician may inspect tie-downs. Most repairs take 1–3 hours.
Furnace Repair FAQs — Sunrise
Yes, Florida requires a mechanical permit for most furnace repairs, especially those involving electrical or gas connections. Your contractor should handle the permit.
Get a furnace repair quote.
No heat? Compare licensed local pros fast.