Furnace Repair in Conyers
Get fast, fair pricing from licensed local pros. Typical Conyers cost: $65 – $200 installed.
- Flame sensor
- $65 – $200
- Igniter
- $125 – $350
- Blower motor
- $325 – $1.2k
- Control board
- $225 – $650
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Conyers repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
In Conyers, Georgia, furnace repair costs typically range from $65 for a simple flame sensor replacement to over $2,800 for a heat exchanger. Labor and diagnostic fees add $60–$150. With a median home age of 37 years and a hot-humid climate, older systems often need repairs. Georgia requires a mechanical permit for furnace work, and licensed contractors must handle installations. Given the high cooling demand, a heat pump is often recommended, and the federal 25C tax credit (up to $2,000) can offset costs for qualifying high-efficiency systems.
- Diagnostic / service callOften credited toward the repair$60 – $150
- Flame sensor or thermocoupleCommon no-heat cause on gas units$65 – $200
- Hot-surface igniterFurnace clicks but won’t light$125 – $350
- Blower motorNo airflow / weak airflow$325 – $1,200
- Heat exchangerCracked exchanger often means replace$1,200 – $2,800+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Conyers
U.S. Census ACS- Households
- 6,966
- Homeowners
- 2,713
- 34% own
- Median home value
- $170,600
- Median income
- $53,500
- Median home built
- 1989
- Housing units
- 7,880
With a median home built in 1989, many Conyers AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Conyers?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Conyers.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Conyers
Given Georgia’s hot-humid climate and mixed heating, high-seer2 heat pump is the sensible default for most Conyers homes. With a long, hard cooling season here, stepping up the SEER2 tier pays back through lower summer bills. A pro can confirm the right size and system for your home with a load calculation.
Sources: Georgia's Home Energy Rebates (GEFA) · Georgia Power Home Energy Improvement Program · EnergySage Georgia electricity rates
What Conyers code requires
Installing or replacing an HVAC system in Conyers follows Georgia rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum14.3 SEER2 (Southeast)
Federal Southeast-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Georgia follows the IECC-based state energy code; mechanical permits and licensed-contractor installs are required, and Manual J/S sizing is recommended practice but not strictly code-enforced on changeouts.
Sources: Georgia's Home Energy Rebates (GEFA) · Georgia Power Home Energy Improvement Program · EnergySage Georgia electricity rates
Not sure which rules and rebates apply to your home?
A licensed Conyers pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Conyers
Georgia heating is mostly mixed, which shapes the money back:
- StateUp to $8,000 for a qualifying heat pump (income-qualified, <150% AMI)Georgia Home Energy Rebates - HEAR (Home Electrification and Appliance Rebates) →
State or utility program — verify eligibility before you buy.
- StateUp to $1,000 (up to 50% back on qualifying energy-saving upgrades)Georgia Power Home Energy Improvement Program (HEIP) →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Georgia.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Conyers, explained.
What Affects Furnace Repair Costs in Conyers?
Prices vary by the part needed: flame sensors ($65–$200), igniters ($125–$350), blower motors ($325–$1,200), control boards ($225–$650), and heat exchangers ($1,200–$2,800+). Labor and diagnostic fees add $60–$150. Older homes (median built 1989) may have outdated systems that cost more to repair. Permit fees and the need for a licensed contractor also factor in. Choosing a heat pump can qualify for federal tax credits, potentially lowering net costs.
Common Furnace Problems in Conyers
Flame Sensor Failure
A dirty or faulty flame sensor prevents ignition. Repair costs $65–$200.
Igniter Malfunction
A cracked or worn igniter stops the furnace from lighting. Replacement runs $125–$350.
Blower Motor Issues
A failing blower motor reduces airflow. Repair or replacement costs $325–$1,200.
Furnace Repair FAQs — Conyers
Yes, Georgia requires a mechanical permit for furnace work. A licensed contractor typically handles the permit process.
Get a furnace repair quote.
No heat? Compare licensed local pros fast.