Furnace Repair in Derby
Get fast, fair pricing from licensed local pros. Typical Derby cost: $75 – $250 installed.
- Flame sensor
- $75 – $250
- Igniter
- $150 – $425
- Blower motor
- $375 – $1.4k
- Control board
- $275 – $750
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Derby repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair in Derby, Kansas typically costs between $75 and $3,400+, depending on the part and labor. Derby is a smaller market (tier 3 of 4) with a median home age of 36 years, so older furnaces may need more frequent repairs. Most homes use gas heating, and the climate is mixed-humid/cold (IECC zones 4A-5A). Local mechanical permits are required, and code rules vary by jurisdiction. A diagnostic fee of $70–$200 is standard. For new systems, an AC-gas furnace combination is recommended, and the federal 25C tax credit may apply for qualifying high-efficiency equipment.
- Diagnostic / service callOften credited toward the repair$70 – $200
- Flame sensor or thermocoupleCommon no-heat cause on gas units$75 – $250
- Hot-surface igniterFurnace clicks but won’t light$150 – $425
- Blower motorNo airflow / weak airflow$375 – $1,450
- Heat exchangerCracked exchanger often means replace$1,450 – $3,400+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Derby
U.S. Census ACS- Households
- 10,220
- Homeowners
- 6,865
- 66% own
- Median home value
- $210,600
- Median income
- $79,581
- Median home built
- 1990
- Housing units
- 10,449
With a median home built in 1990, many Derby AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Derby?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Derby.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Derby
Given Kansas’s mixed-humid / cold (iecc zones 4a-5a) climate and gas heating, high-seer2 ac + gas furnace is the sensible default for most Derby homes. A pro can confirm the right size and system for your home with a load calculation.
Sources: Evergy Heating & Cooling Discounts (Kansas) · Kansas HVAC Permit Process - Kansas HVAC Authority · EnergySage - Kansas Electricity Rates
What Derby code requires
Installing or replacing an HVAC system in Derby follows Kansas rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
No statewide HVAC license or building code; mechanical permits and rules are set locally by each city/county, so requirements vary by jurisdiction.
Sources: Evergy Heating & Cooling Discounts (Kansas) · Kansas HVAC Permit Process - Kansas HVAC Authority · EnergySage - Kansas Electricity Rates
Not sure which rules and rebates apply to your home?
A licensed Derby pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Derby
Kansas heating is mostly gas, which shapes the money back:
- StateUp to $1,300 (SEER2 15.2+)Evergy Kansas - Air Source Heat Pump Rebate →
State or utility program — verify eligibility before you buy.
- StateUp to $1,000 (SEER2 15.2+)Evergy Kansas - High-Efficiency Central AC Rebate →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Kansas.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Derby, explained.
What affects furnace repair costs in Derby?
Repair costs in Derby depend on the part needed, labor time, and whether a permit is required. Common repairs like flame sensors ($75–$250) are more affordable, while heat exchanger replacements ($1,450–$3,400+) are costly. Older homes (median built 1990) may have harder-to-find parts. Since Derby has no statewide HVAC license, local contractor rates and permit fees can vary. The federal 25C tax credit (up to $600 for AC or $2,000 for a heat pump) can offset costs if you upgrade to a qualifying system.
Common furnace repairs in Derby
Flame sensor failure
A dirty or faulty flame sensor is a frequent issue in Derby, especially in older furnaces. Repair costs $75–$250.
Igniter problems
A worn-out igniter can prevent the furnace from starting. Replacement runs $150–$425.
Blower motor issues
A failing blower motor reduces airflow and efficiency. Repair or replacement costs $375–$1,450.
Furnace Repair FAQs — Derby
Yes, Kansas requires a mechanical permit for furnace work. Permit rules are set locally, so check with Derby city officials for specific requirements.
Furnace Repair near Derby
Get a furnace repair quote.
No heat? Compare licensed local pros fast.