Furnace Repair in Landover
Get fast, fair pricing from licensed local pros. Typical Landover cost: $70 – $200 installed.
- Flame sensor
- $70 – $200
- Igniter
- $125 – $375
- Blower motor
- $350 – $1.3k
- Control board
- $250 – $700
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Landover repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair in Landover, Maryland, typically costs between $70 and $3,000+, depending on the component. With a median home age of 57 years, older systems often require more frequent repairs. Maryland requires a mechanical permit for furnace work, and the state's electrification push (EmPOWER Maryland) encourages energy audits. In Landover's mixed-humid climate, a dual-fuel system—pairing a heat pump with a furnace—is a recommended approach for efficiency and reliability.
- Diagnostic / service callOften credited toward the repair$65 – $175
- Flame sensor or thermocoupleCommon no-heat cause on gas units$70 – $200
- Hot-surface igniterFurnace clicks but won’t light$125 – $375
- Blower motorNo airflow / weak airflow$350 – $1,250
- Heat exchangerCracked exchanger often means replace$1,250 – $3,000+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Landover
U.S. Census ACS- Households
- 9,772
- Homeowners
- 4,006
- 43% own
- Median home value
- $280,500
- Median income
- $68,643
- Median home built
- 1969
- Housing units
- 9,378
With a median home built in 1969, many Landover AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Landover?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Landover.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Landover
Given Maryland’s mixed-humid climate and mixed heating, dual-fuel (cold-climate heat pump + gas furnace) is the sensible default for most Landover homes. A pro can confirm the right size and system for your home with a load calculation.
Sources: EmPOWER Maryland / BGE Smart Energy rebates · SEER2 North region standards · EIA Maryland electricity price data
What Landover code requires
Installing or replacing an HVAC system in Landover follows Maryland rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Strong statewide electrification push: EmPOWER Maryland requires a low-cost ($100) home energy audit to unlock the largest heat-pump/electrification rebates, and Maryland building energy code (IECC-based) increasingly favors heat pumps.
Sources: EmPOWER Maryland / BGE Smart Energy rebates · SEER2 North region standards · EIA Maryland electricity price data
Not sure which rules and rebates apply to your home?
A licensed Landover pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Landover
Maryland heating is mostly mixed, which shapes the money back:
- StateUp to $15,000 or 75% of project costEmPOWER Maryland - electrification (fossil-fuel to heat pump) rebate →
State or utility program — verify eligibility before you buy.
- State$800-$1,700 per heat pumpEmPOWER Maryland midstream/instant heat pump rebate (via contractor) →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Maryland.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Landover, explained.
What Affects Furnace Repair Costs in Landover?
Repair costs in Landover vary by the part needing replacement: flame sensors ($70–$200), igniters ($125–$375), blower motors ($350–$1,250), control boards ($250–$700), and heat exchangers ($1,250–$3,000+). A diagnostic fee of $65–$175 is standard. Older homes (median built 1969) may have outdated systems that are harder to service. Maryland's permit requirement adds a small fee, and choosing a dual-fuel system can influence long-term costs.
Common Furnace Repairs in Landover
Flame Sensor Failure
A dirty or faulty flame sensor causes the furnace to cycle on and off. Cleaning or replacement costs $70–$200.
Igniter Problems
A broken igniter prevents the furnace from lighting. Replacement runs $125–$375.
Blower Motor Issues
A failing blower motor reduces airflow. Repair or replacement costs $350–$1,250.
Furnace Repair FAQs — Landover
Yes, Maryland requires a mechanical permit for most furnace repairs. Your contractor should handle the permit application.
Get a furnace repair quote.
No heat? Compare licensed local pros fast.