Furnace Repair in Beverly
Get fast, fair pricing from licensed local pros. Typical Beverly cost: $80 – $250 installed.
- Flame sensor
- $80 – $250
- Igniter
- $150 – $450
- Blower motor
- $400 – $1.5k
- Control board
- $300 – $800
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Beverly repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Beverly homeowners with furnaces from the 1950s often need repairs in winter. Local labor rates and the need for a mechanical permit (required by Massachusetts code) add to the cost. A typical diagnostic runs $75–$200, and common repairs like a flame sensor ($80–$250) or igniter ($150–$450) are priced accordingly. Because Beverly is in Climate Zone 5, proper sizing is critical for efficiency and comfort. Many homes use mixed heating, and dual-fuel systems are a recommended option for balancing performance and energy costs.
- Diagnostic / service callOften credited toward the repair$75 – $200
- Flame sensor or thermocoupleCommon no-heat cause on gas units$80 – $250
- Hot-surface igniterFurnace clicks but won’t light$150 – $450
- Blower motorNo airflow / weak airflow$400 – $1,500
- Heat exchangerCracked exchanger often means replace$1,500 – $3,500+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Beverly
U.S. Census ACS- Households
- 16,966
- Homeowners
- 10,159
- 58% own
- Median home value
- $569,300
- Median income
- $99,525
- Median home built
- 1958
- Housing units
- 17,656
With a median home built in 1958, many Beverly AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Beverly?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Beverly.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Beverly
Given Massachusetts’s cold climate and mixed heating, dual-fuel (cold-climate heat pump + gas furnace) is the sensible default for most Beverly homes. A pro can confirm the right size and system for your home with a load calculation.
Sources: Mass Save Air Source Heat Pumps · EIA Massachusetts State Energy Profile
What Beverly code requires
Installing or replacing an HVAC system in Beverly follows Massachusetts rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Cold-climate (Climate Zone 5) sizing matters; Mass Save now requires cold-climate-rated heat pumps and excludes R-410A models from rebates as of Jan 1, 2026.
Sources: Mass Save Air Source Heat Pumps · EIA Massachusetts State Energy Profile
Not sure which rules and rebates apply to your home?
A licensed Beverly pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Beverly
Massachusetts heating is mostly mixed, which shapes the money back:
- StateUp to $2,650/ton, capped at $8,500Mass Save Whole-Home Air Source Heat Pump Rebate →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Beverly, explained.
Why furnace repair costs vary in Beverly
Repair costs depend on the part needed (e.g., blower motor $400–$1,500 vs. control board $300–$800), the age of your system (older units may be harder to source parts for), and whether a permit is required. Labor rates reflect local HVAC demand and the complexity of accessing your furnace. Seasonal demand in winter can also affect pricing.
Common furnace repairs in Beverly
Flame sensor failure
A dirty or faulty flame sensor can cause the furnace to cycle on and off. Repair typically costs $80–$250.
Igniter problems
A broken igniter prevents the furnace from lighting. Replacement runs $150–$450.
Blower motor issues
A failing blower motor reduces airflow. Replacing it costs $400–$1,500.
Furnace Repair FAQs — Beverly
Yes, Massachusetts requires a mechanical permit for most furnace repairs. Your contractor should pull the permit and arrange any required inspections.
Furnace Repair near Beverly
Get a furnace repair quote.
No heat? Compare licensed local pros fast.