Furnace Repair in Hudson
Get fast, fair pricing from licensed local pros. Typical Hudson cost: $75 – $225 installed.
- Flame sensor
- $75 – $225
- Igniter
- $150 – $425
- Blower motor
- $375 – $1.4k
- Control board
- $275 – $750
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Hudson repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair in Hudson, Massachusetts, typically costs between $75 and $3,200+, depending on the part and labor. With a median home age of 58 years, many homes have older systems that may need more frequent repairs. A diagnostic fee of $70–$175 is standard. Massachusetts requires a mechanical permit for furnace work, which adds to the cost. Given Hudson's cold climate (Zone 5), proper sizing is critical for efficiency and comfort. Many homeowners consider dual-fuel systems, combining a furnace with a heat pump, to optimize energy use and qualify for federal tax credits.
- Diagnostic / service callOften credited toward the repair$70 – $175
- Flame sensor or thermocoupleCommon no-heat cause on gas units$75 – $225
- Hot-surface igniterFurnace clicks but won’t light$150 – $425
- Blower motorNo airflow / weak airflow$375 – $1,400
- Heat exchangerCracked exchanger often means replace$1,400 – $3,200+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Hudson
U.S. Census ACS- Households
- 6,198
- Homeowners
- 4,416
- 63% own
- Median home value
- $439,000
- Median income
- $91,324
- Median home built
- 1968
- Housing units
- 6,960
With a median home built in 1968, many Hudson AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Hudson?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Hudson.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Hudson
Given Massachusetts’s cold climate and mixed heating, dual-fuel (cold-climate heat pump + gas furnace) is the sensible default for most Hudson homes. A pro can confirm the right size and system for your home with a load calculation.
Sources: Mass Save Air Source Heat Pumps · EIA Massachusetts State Energy Profile
What Hudson code requires
Installing or replacing an HVAC system in Hudson follows Massachusetts rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Cold-climate (Climate Zone 5) sizing matters; Mass Save now requires cold-climate-rated heat pumps and excludes R-410A models from rebates as of Jan 1, 2026.
Sources: Mass Save Air Source Heat Pumps · EIA Massachusetts State Energy Profile
Not sure which rules and rebates apply to your home?
A licensed Hudson pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Hudson
Massachusetts heating is mostly mixed, which shapes the money back:
- StateUp to $2,650/ton, capped at $8,500Mass Save Whole-Home Air Source Heat Pump Rebate →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Hudson, explained.
What Affects Furnace Repair Costs in Hudson
Repair costs in Hudson vary by part type and labor time. Common repairs like flame sensors ($75–$225) are more affordable, while blower motors ($375–$1,400) or heat exchangers ($1,400–$3,200+) are costlier. Older homes (median built 1968) may have outdated systems requiring harder-to-find parts. Permit fees and the need for load calculations also influence pricing. Seasonal demand can affect availability, but upfront pricing is standard.
Common Furnace Problems in Hudson
Flame Sensor Failure
A dirty or faulty flame sensor can cause the furnace to shut off after ignition. Cleaning or replacing it costs $75–$225.
Igniter Issues
A broken igniter prevents the furnace from lighting. Replacement typically runs $150–$425.
Blower Motor Problems
A malfunctioning blower motor reduces airflow and efficiency. Repair or replacement costs $375–$1,400.
Furnace Repair FAQs — Hudson
Yes, Massachusetts requires a mechanical permit for most furnace repairs. Your contractor should handle the permit, which may add to the total cost.
Get a furnace repair quote.
No heat? Compare licensed local pros fast.