Furnace Repair in Andover
Get fast, fair pricing from licensed local pros. Typical Andover cost: $80 – $250 installed.
- Flame sensor
- $80 – $250
- Igniter
- $150 – $450
- Blower motor
- $400 – $1.5k
- Control board
- $300 – $800
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Andover repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair in Andover, Minnesota, typically costs between $80 and $3,500, depending on the component. With a median home age of 33 years and cold winters, common repairs include flame sensors, igniters, and blower motors. A diagnostic fee of $75–$200 applies. Minnesota requires a mechanical permit for furnace work; gas-line work must be done by a licensed plumber or gas fitter. Many Andover homeowners choose dual-fuel systems to optimize efficiency in the cold climate.
- Diagnostic / service callOften credited toward the repair$75 – $200
- Flame sensor or thermocoupleCommon no-heat cause on gas units$80 – $250
- Hot-surface igniterFurnace clicks but won’t light$150 – $450
- Blower motorNo airflow / weak airflow$400 – $1,500
- Heat exchangerCracked exchanger often means replace$1,500 – $3,500+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Andover
U.S. Census ACS- Households
- 13,056
- Homeowners
- 10,181
- 91% own
- Median home value
- $370,200
- Median income
- $123,054
- Median home built
- 1993
- Housing units
- 11,138
With a median home built in 1993, many Andover AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Andover?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Andover.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Andover
Given Minnesota’s cold climate and gas heating, dual-fuel (cold-climate heat pump + gas furnace) is the sensible default for most Andover homes. A pro can confirm the right size and system for your home with a load calculation.
Sources: MN Dept. of Commerce - Residential Heat Pump Rebate · Furnace Direct - MN HVAC permit requirements · EIA - Minnesota State Energy Profile
What Andover code requires
Installing or replacing an HVAC system in Andover follows Minnesota rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Cold-climate sizing matters; gas-line work on a furnace must be done by a licensed plumber/gas fitter even if a homeowner pulls the mechanical permit.
Sources: MN Dept. of Commerce - Residential Heat Pump Rebate · Furnace Direct - MN HVAC permit requirements · EIA - Minnesota State Energy Profile
Not sure which rules and rebates apply to your home?
A licensed Andover pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Andover
Minnesota heating is mostly gas, which shapes the money back:
- StateUp to $4,000 for a cold-climate air-source heat pumpMinnesota Residential Heat Pump Rebate (Dept. of Commerce) →
State or utility program — verify eligibility before you buy.
- State$400 (ducted ASHP)Minnesota Power Air Source Heat Pump (ducted) Rebate →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Minnesota.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Andover, explained.
What affects furnace repair costs in Andover?
Repair costs in Andover depend on the part needed and labor. Flame sensor repairs are more affordable ($80–$250), while heat exchanger replacements can exceed $3,500. The age of your furnace (median home built 1993) may increase the likelihood of major repairs. Permit fees and the need for a licensed gas fitter for gas-line work also add to the total. High homeownership (91.4%) means many homeowners invest in repairs rather than replacement.
Common furnace repairs in Andover
Flame sensor failure
A dirty or faulty flame sensor causes the furnace to cycle on and off. Cleaning or replacement costs $80–$250.
Igniter problems
A broken igniter prevents the furnace from lighting. Replacement runs $150–$450.
Blower motor issues
A failing blower motor reduces airflow. Repair or replacement costs $400–$1,500.
Furnace Repair FAQs — Andover
Yes, Minnesota requires a mechanical permit for most furnace repairs. Gas-line work must be performed by a licensed plumber or gas fitter.
Furnace Repair near Andover
Get a furnace repair quote.
No heat? Compare licensed local pros fast.