Furnace Repair in Mounds View
Get fast, fair pricing from licensed local pros. Typical Mounds View cost: $75 – $225 installed.
- Flame sensor
- $75 – $225
- Igniter
- $150 – $425
- Blower motor
- $375 – $1.4k
- Control board
- $275 – $750
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Mounds View repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
In Mounds View, Minnesota, furnace repair costs reflect the area's older homes (median built 1975) and cold climate. Typical repair prices range from $75–$225 for a flame sensor to $1,400–$3,200+ for a heat exchanger, plus a $70–$175 diagnostic fee. Because most homes use gas heating, repairs often involve gas-line work, which must be performed by a licensed plumber or gas fitter. A mechanical permit is required for any furnace replacement or major repair, and load calculations are recommended to ensure proper sizing for cold winters. For homeowners considering a replacement, a dual-fuel system (heat pump paired with a gas furnace) is well-suited for Mounds View's climate, and the federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump) can help offset costs.
- Diagnostic / service callOften credited toward the repair$70 – $175
- Flame sensor or thermocoupleCommon no-heat cause on gas units$75 – $225
- Hot-surface igniterFurnace clicks but won’t light$150 – $425
- Blower motorNo airflow / weak airflow$375 – $1,400
- Heat exchangerCracked exchanger often means replace$1,400 – $3,200+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Mounds View
U.S. Census ACS- Households
- 5,240
- Homeowners
- 3,455
- 65% own
- Median home value
- $273,300
- Median income
- $89,358
- Median home built
- 1975
- Housing units
- 5,359
With a median home built in 1975, many Mounds View AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Mounds View?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Mounds View.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Mounds View
Given Minnesota’s cold climate and gas heating, dual-fuel (cold-climate heat pump + gas furnace) is the sensible default for most Mounds View homes. A pro can confirm the right size and system for your home with a load calculation.
Sources: MN Dept. of Commerce - Residential Heat Pump Rebate · Furnace Direct - MN HVAC permit requirements · EIA - Minnesota State Energy Profile
What Mounds View code requires
Installing or replacing an HVAC system in Mounds View follows Minnesota rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Cold-climate sizing matters; gas-line work on a furnace must be done by a licensed plumber/gas fitter even if a homeowner pulls the mechanical permit.
Sources: MN Dept. of Commerce - Residential Heat Pump Rebate · Furnace Direct - MN HVAC permit requirements · EIA - Minnesota State Energy Profile
Not sure which rules and rebates apply to your home?
A licensed Mounds View pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Mounds View
Minnesota heating is mostly gas, which shapes the money back:
- StateUp to $4,000 for a cold-climate air-source heat pumpMinnesota Residential Heat Pump Rebate (Dept. of Commerce) →
State or utility program — verify eligibility before you buy.
- State$400 (ducted ASHP)Minnesota Power Air Source Heat Pump (ducted) Rebate →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Minnesota.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Mounds View, explained.
Why Furnace Repair Costs Vary in Mounds View
Repair costs in Mounds View depend on the part needed, labor time, and whether a permit is required. Older homes (median built 1975) may have outdated ductwork or electrical systems that complicate repairs. Gas-line work adds cost because it must be done by a licensed professional. Seasonal demand also plays a role—repairs in peak winter months may be more expensive due to high service call volume. Choosing a dual-fuel system for replacement can provide long-term savings, but initial installation costs are higher.
Common Furnace Repairs in Mounds View
Flame Sensor Failure
A dirty or faulty flame sensor can cause the furnace to shut off after igniting. Cleaning or replacing the sensor costs $75–$225.
Igniter Problems
A broken igniter prevents the furnace from starting. Replacement typically runs $150–$425, depending on the model.
Blower Motor Issues
A malfunctioning blower motor reduces airflow and heating efficiency. Repair or replacement costs $375–$1,400.
Furnace Repair FAQs — Mounds View
Yes, Minnesota requires a mechanical permit for any furnace replacement or major repair. A homeowner can pull the permit, but gas-line work must be done by a licensed plumber or gas fitter.
Furnace Repair near Mounds View
Get a furnace repair quote.
No heat? Compare licensed local pros fast.