Furnace Repair in Columbia
Get fast, fair pricing from licensed local pros. Typical Columbia cost: $85 – $275 installed.
- Flame sensor
- $85 – $275
- Igniter
- $150 – $475
- Blower motor
- $425 – $1.6k
- Control board
- $325 – $850
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Columbia repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair in Columbia, Missouri typically runs $80–$225 for a diagnostic fee plus labor and parts. With most homes built around 1993, common repairs include flame sensors ($85–$275), igniters ($150–$475), and blower motors ($425–$1,600). Columbia is a mixed-humid climate where gas furnaces are standard, so repairs often focus on gas-fired systems. Local permit requirements vary—Missouri has no statewide mechanical code, so Columbia sets its own rules; a permit is typically needed for major repairs like heat exchanger replacement ($1,600–$3,800+). For high-efficiency repairs, the federal 25C tax credit may apply to qualifying upgrades.
- Diagnostic / service callOften credited toward the repair$80 – $225
- Flame sensor or thermocoupleCommon no-heat cause on gas units$85 – $275
- Hot-surface igniterFurnace clicks but won’t light$150 – $475
- Blower motorNo airflow / weak airflow$425 – $1,600
- Heat exchangerCracked exchanger often means replace$1,600 – $3,800+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Columbia
U.S. Census ACS- Households
- 50,469
- Homeowners
- 24,886
- 45% own
- Median home value
- $248,600
- Median income
- $60,455
- Median home built
- 1993
- Housing units
- 54,897
With a median home built in 1993, many Columbia AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Columbia?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Columbia.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Columbia
Given Missouri’s mixed-humid climate and gas heating, high-seer2 ac + gas furnace is the sensible default for most Columbia homes. A pro can confirm the right size and system for your home with a load calculation.
Sources: Ameren Missouri Heating and Cooling / HVAC rebates · SEER2 North Region efficiency standards
What Columbia code requires
Installing or replacing an HVAC system in Columbia follows Missouri rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Missouri has no statewide residential building/mechanical code, so permit and inspection requirements are set locally by each city or county.
Sources: Ameren Missouri Heating and Cooling / HVAC rebates · SEER2 North Region efficiency standards
Not sure which rules and rebates apply to your home?
A licensed Columbia pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Columbia
Missouri heating is mostly gas, which shapes the money back:
- StateUp to $2,000 per qualifying air-source heat pump (up to $1,000 central AC, up to $500/ton mini-split)Ameren Missouri PAYS (Pay As You Save) air-source heat pump rebate →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Missouri.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Columbia, explained.
Why furnace repair costs vary in Columbia
Repair costs in Columbia depend on the part needed, labor rates, and whether a permit is required. Older homes (median built 1993) may need more extensive work on gas furnaces. Diagnostic fees range $80–$225, and parts like control boards ($325–$850) or heat exchangers ($1,600+) drive up costs. Climate factors—mixed-humid with moderate cooling demand—mean furnaces run less often than in colder regions, potentially lowering wear. However, local permit fees and contractor overhead can add $50–$150 to a job.
Common furnace problems in Columbia
Flame sensor failure
A dirty or faulty flame sensor causes the furnace to cycle on and off. Repair cost: $85–$275.
Igniter malfunction
A cracked or worn igniter prevents the furnace from lighting. Replacement runs $150–$475.
Blower motor issues
A failing blower motor reduces airflow or stops the fan. Repair cost: $425–$1,600.
What to expect during a furnace repair in Columbia
A technician will first diagnose the issue ($80–$225 diagnostic fee). For gas furnaces, they check the flame sensor, igniter, and gas pressure. If a permit is required for the repair (e.g., heat exchanger), the contractor pulls it with the city. Most repairs are completed in one visit, though parts may need ordering. After repair, the system is tested for proper operation and safety.
Furnace Repair FAQs — Columbia
Yes, for major repairs like heat exchanger replacement or gas line work. Minor repairs (flame sensor, igniter) typically do not require a permit. Check with the City of Columbia Building & Site Development for specific requirements.
Furnace Repair near Columbia
Get a furnace repair quote.
No heat? Compare licensed local pros fast.