Furnace Repair in Derry
Get fast, fair pricing from licensed local pros. Typical Derry cost: $70 – $225 installed.
- Flame sensor
- $70 – $225
- Igniter
- $125 – $400
- Blower motor
- $350 – $1.4k
- Control board
- $275 – $700
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Derry repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair costs in Derry, New Hampshire, typically range from $70 for a diagnostic fee to over $3,200 for a heat exchanger replacement. With a median home age of 45 years, many furnaces in Derry are older and may require repairs to components like the blower motor or control board. New Hampshire requires a mechanical permit for furnace repairs, and since R-410A refrigerant is being phased out, any new equipment must use R-32 or R-454B. Given the cold climate, proper sizing is critical to avoid breakdowns during winter.
- Diagnostic / service callOften credited toward the repair$70 – $175
- Flame sensor or thermocoupleCommon no-heat cause on gas units$70 – $225
- Hot-surface igniterFurnace clicks but won’t light$125 – $400
- Blower motorNo airflow / weak airflow$350 – $1,350
- Heat exchangerCracked exchanger often means replace$1,350 – $3,200+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Derry
U.S. Census ACS- Households
- 9,211
- Homeowners
- 5,384
- 55% own
- Median home value
- $328,200
- Median income
- $83,750
- Median home built
- 1981
- Housing units
- 9,784
With a median home built in 1981, many Derry AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Derry?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Derry.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Derry
Given New Hampshire’s cold climate and mixed heating, dual-fuel (cold-climate heat pump + gas furnace) is the sensible default for most Derry homes. The cooling season is short, so the budget is better spent on heating efficiency than on ultra-high SEER2. A pro can confirm the right size and system for your home with a load calculation.
Sources: NHSaves Heat Pumps (residential rebates) · NH Department of Energy Home Electrification & Appliance Rebates · Choose Energy NH electricity rates
What Derry code requires
Installing or replacing an HVAC system in Derry follows New Hampshire rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Cold-climate sizing matters: NHSaves rebates require cold-climate heat pumps rated for low ambient (NEEP-listed) performance, and equipment must use R-32/R-454B (R-410A no longer allowed).
Sources: NHSaves Heat Pumps (residential rebates) · NH Department of Energy Home Electrification & Appliance Rebates · Choose Energy NH electricity rates
Not sure which rules and rebates apply to your home?
A licensed Derry pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Derry
New Hampshire heating is mostly mixed, which shapes the money back:
- State$250 per ton, up to $1,250NHSaves Cold-Climate Heat Pump Rebate (standard tier, switching from oil/gas/propane) →
State or utility program — verify eligibility before you buy.
- State$750 (UEF 2.0+)NHSaves Heat Pump Water Heater Rebate →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including New Hampshire.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Derry, explained.
What affects furnace repair costs in Derry?
Repair costs depend on the specific part needing replacement—flame sensors are more affordable, while heat exchangers are costly. Labor rates reflect local overhead, and older homes (median built 1981) may have systems that are harder to access or require additional work to meet current code. Permit fees also add to the total. In cold months, emergency service calls may carry a premium.
Common furnace issues in Derry
Igniter failure
A worn igniter prevents the furnace from lighting, costing $125–$400 to replace.
Blower motor problems
A faulty blower motor reduces airflow, with replacement costing $350–$1,350.
Control board malfunction
The control board can fail due to age or power surges, costing $275–$700 to replace.
Furnace Repair FAQs — Derry
Yes, New Hampshire requires a mechanical permit for most furnace repairs, especially those involving gas lines or major component replacements.
Get a furnace repair quote.
No heat? Compare licensed local pros fast.