Furnace Repair in Franklin
Get fast, fair pricing from licensed local pros. Typical Franklin cost: $65 – $200 installed.
- Flame sensor
- $65 – $200
- Igniter
- $125 – $350
- Blower motor
- $325 – $1.2k
- Control board
- $225 – $650
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Franklin repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair costs in Franklin, Ohio, typically range from $60–$150 for a diagnostic fee, plus labor and parts. Common repairs include flame sensors ($65–$200), igniters ($125–$350), blower motors ($325–$1,200), control boards ($225–$650), and heat exchangers ($1,200–$2,800+). With a median home age of 59 years, many Franklin homes have older furnaces that may need more frequent repairs. Ohio requires a mechanical permit for furnace work, and post-install inspection is mandatory, though permitting is handled by local jurisdictions. The mixed-humid climate and moderate cooling demand make a gas furnace with central AC a well-suited system choice.
- Diagnostic / service callOften credited toward the repair$60 – $150
- Flame sensor or thermocoupleCommon no-heat cause on gas units$65 – $200
- Hot-surface igniterFurnace clicks but won’t light$125 – $350
- Blower motorNo airflow / weak airflow$325 – $1,200
- Heat exchangerCracked exchanger often means replace$1,200 – $2,800+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Franklin
U.S. Census ACS- Households
- 4,669
- Homeowners
- 2,798
- 56% own
- Median home value
- $141,200
- Median income
- $52,966
- Median home built
- 1967
- Housing units
- 4,974
With a median home built in 1967, many Franklin AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Franklin?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Franklin.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Franklin
Given Ohio’s mixed-humid climate and gas heating, high-seer2 ac + gas furnace is the sensible default for most Franklin homes. A pro can confirm the right size and system for your home with a load calculation.
Sources: AEP Ohio Savings / Rebates · Duke Energy Ohio HVAC Replacement Rebate · Ohio Administrative Code 4101:8-14 (Residential Mechanical)
What Franklin code requires
Installing or replacing an HVAC system in Franklin follows Ohio rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Work follows the Residential Code of Ohio / Ohio Mechanical Code; permit + post-install inspection required, but permitting is handled by local city/county building departments so requirements vary by jurisdiction.
Sources: AEP Ohio Savings / Rebates · Duke Energy Ohio HVAC Replacement Rebate · Ohio Administrative Code 4101:8-14 (Residential Mechanical)
Not sure which rules and rebates apply to your home?
A licensed Franklin pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Franklin
Ohio heating is mostly gas, which shapes the money back:
- State$300+ for air-source heat pumps, up to $1,200 for geothermalAEP Ohio Residential Energy Efficiency Rebates (air-source/ductless/geothermal heat pumps) →
State or utility program — verify eligibility before you buy.
- StateVaries by qualifying high-efficiency equipmentDuke Energy Ohio HVAC Replacement Rebate →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Ohio, subject to current federal eligibility.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Franklin, explained.
Why Furnace Repair Costs Vary in Franklin
Repair costs in Franklin depend on the part needed, labor rates, and whether a permit is required. Older homes (median built 1967) may have outdated systems that are harder to service, increasing labor time. The diagnostic fee ($60–$150) covers the technician's assessment. Parts like heat exchangers are more expensive due to material and labor. Permit fees, if required by your local building department, add to the total. Choosing a high-efficiency furnace may qualify for federal tax credits (up to $600 for qualifying AC), but upfront costs are higher.
Common Furnace Issues in Franklin
Igniter Failure
A worn-out igniter is a frequent problem in older furnaces, costing $125–$350 to replace.
Blower Motor Malfunction
Blower motors often fail due to age or debris, with replacement ranging from $325 to $1,200.
Heat Exchanger Cracks
Cracked heat exchangers are a safety concern and costly to repair ($1,200–$2,800+), often requiring full replacement.
Furnace Repair FAQs — Franklin
Yes, Ohio requires a mechanical permit for most furnace repairs, and a post-install inspection is mandatory. Check with your local building department for specific requirements.
Furnace Repair near Franklin
Get a furnace repair quote.
No heat? Compare licensed local pros fast.