Furnace Repair in Murrells Inlet
Get fast, fair pricing from licensed local pros. Typical Murrells Inlet cost: $70 – $225 installed.
- Flame sensor
- $70 – $225
- Igniter
- $125 – $375
- Blower motor
- $350 – $1.3k
- Control board
- $250 – $700
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Murrells Inlet repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair in Murrells Inlet typically costs between $65 and $175 for a diagnostic fee, plus parts and labor. Common repairs include flame sensors ($70–$225), igniters ($125–$375), blower motors ($350–$1,300), control boards ($250–$700), and heat exchangers ($1,300–$3,000+). South Carolina requires a mechanical permit for furnace repairs, and the state energy code (based on IECC) applies, with a focus on hot-humid conditions. Most homes use heat pumps for heating, so repairs often involve electric-strip backup or humidity control components. The median home in Murrells Inlet was built around 2000, meaning many systems are 15–25 years old and may need more frequent repairs.
- Diagnostic / service callOften credited toward the repair$65 – $175
- Flame sensor or thermocoupleCommon no-heat cause on gas units$70 – $225
- Hot-surface igniterFurnace clicks but won’t light$125 – $375
- Blower motorNo airflow / weak airflow$350 – $1,300
- Heat exchangerCracked exchanger often means replace$1,300 – $3,000+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Murrells Inlet
U.S. Census ACS- Households
- 4,119
- Homeowners
- 3,901
- 71% own
- Median home value
- $336,500
- Median income
- $71,019
- Median home built
- 2000
- Housing units
- 5,497
With a median home built in 2000, many Murrells Inlet AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Murrells Inlet?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Murrells Inlet.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Murrells Inlet
Given South Carolina’s hot-humid climate and heat-pump heating, high-seer2 heat pump is the sensible default for most Murrells Inlet homes. With a long, hard cooling season here, stepping up the SEER2 tier pays back through lower summer bills. A pro can confirm the right size and system for your home with a load calculation.
Sources: Dominion Energy SC Heating and Cooling Rebates · Duke Energy HVAC Replacement Rebate · EIA South Carolina Electricity Profile
What Murrells Inlet code requires
Installing or replacing an HVAC system in Murrells Inlet follows South Carolina rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum14.3 SEER2 (Southeast)
Federal Southeast-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
South Carolina enforces the IECC-based state energy code with a hot-humid focus; high heat-pump adoption means electric-strip backup sizing and humidity control matter more than cold-climate concerns.
Sources: Dominion Energy SC Heating and Cooling Rebates · Duke Energy HVAC Replacement Rebate · EIA South Carolina Electricity Profile
Not sure which rules and rebates apply to your home?
A licensed Murrells Inlet pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Murrells Inlet
South Carolina heating is mostly heat-pump, which shapes the money back:
- State$400-$1,000 (up to $650 for electric furnace to heat pump)Dominion Energy SC - Heating & Cooling Rebates (ENERGY STAR heat pump) →
State or utility program — verify eligibility before you buy.
- State$500-$1,000 (heat pump replacement; requires Home Energy Check)Duke Energy SC - HVAC Replacement / Home Energy Improvement rebates →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including South Carolina.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Murrells Inlet, explained.
What affects furnace repair costs in Murrells Inlet
Costs vary by part type and labor. A flame sensor or igniter is more affordable, while a blower motor or heat exchanger is more expensive. Permit fees (required by South Carolina code) add to the total. Older homes or units with neglected maintenance may need additional work. The hot-humid climate means humidity control components (e.g., dehumidistats) may be involved, and heat-pump systems require specialized knowledge for electric-strip backup repairs.
Common furnace repair issues in Murrells Inlet
Flame sensor failure
A dirty or faulty flame sensor prevents the furnace from staying lit. This is a common, relatively affordable repair ($70–$225).
Igniter problems
A cracked or worn igniter won't spark the burner. Typical cost is $125–$375, including labor.
Blower motor issues
The blower motor circulates air; failure leads to no heat or poor airflow. Repair costs range from $350 to $1,300.
Furnace Repair FAQs — Murrells Inlet
Most HVAC companies charge a diagnostic fee of $65 to $175, which is often applied to the repair cost if you proceed.
Furnace Repair near Murrells Inlet
Get a furnace repair quote.
No heat? Compare licensed local pros fast.