Furnace Repair in Taylors
Get fast, fair pricing from licensed local pros. Typical Taylors cost: $70 – $225 installed.
- Flame sensor
- $70 – $225
- Igniter
- $125 – $375
- Blower motor
- $350 – $1.3k
- Control board
- $250 – $700
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Taylors repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair in Taylors, SC, typically costs between $65 and $175 for a diagnostic fee, with common repairs like flame sensor replacement ranging from $70 to $225 and blower motor replacement from $350 to $1,300. The median home in Taylors was built in 1981, so many furnaces are aging and may require more frequent repairs. South Carolina's hot-humid climate means heat pumps are the recommended system, but furnace repairs are still needed for backup or older systems. A mechanical permit is required for any furnace work in South Carolina, which can add to the cost.
- Diagnostic / service callOften credited toward the repair$65 – $175
- Flame sensor or thermocoupleCommon no-heat cause on gas units$70 – $225
- Hot-surface igniterFurnace clicks but won’t light$125 – $375
- Blower motorNo airflow / weak airflow$350 – $1,300
- Heat exchangerCracked exchanger often means replace$1,300 – $3,000+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Taylors
U.S. Census ACS- Households
- 9,202
- Homeowners
- 7,093
- 71% own
- Median home value
- $220,800
- Median income
- $70,234
- Median home built
- 1981
- Housing units
- 9,949
With a median home built in 1981, many Taylors AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Taylors?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Taylors.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Taylors
Given South Carolina’s hot-humid climate and heat-pump heating, high-seer2 heat pump is the sensible default for most Taylors homes. With a long, hard cooling season here, stepping up the SEER2 tier pays back through lower summer bills. A pro can confirm the right size and system for your home with a load calculation.
Sources: Dominion Energy SC Heating and Cooling Rebates · Duke Energy HVAC Replacement Rebate · EIA South Carolina Electricity Profile
What Taylors code requires
Installing or replacing an HVAC system in Taylors follows South Carolina rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum14.3 SEER2 (Southeast)
Federal Southeast-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
South Carolina enforces the IECC-based state energy code with a hot-humid focus; high heat-pump adoption means electric-strip backup sizing and humidity control matter more than cold-climate concerns.
Sources: Dominion Energy SC Heating and Cooling Rebates · Duke Energy HVAC Replacement Rebate · EIA South Carolina Electricity Profile
Not sure which rules and rebates apply to your home?
A licensed Taylors pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Taylors
South Carolina heating is mostly heat-pump, which shapes the money back:
- State$400-$1,000 (up to $650 for electric furnace to heat pump)Dominion Energy SC - Heating & Cooling Rebates (ENERGY STAR heat pump) →
State or utility program — verify eligibility before you buy.
- State$500-$1,000 (heat pump replacement; requires Home Energy Check)Duke Energy SC - HVAC Replacement / Home Energy Improvement rebates →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including South Carolina.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Taylors, explained.
What Affects Furnace Repair Costs in Taylors?
Repair costs in Taylors vary based on the part needed and labor. For example, a flame sensor is more affordable to replace than a heat exchanger, which can cost $1,300 to $3,000 or more. The age of your home (median built 1981) may mean older systems with harder-to-find parts. Permit fees and the need for load calculations (strong practice) also influence pricing. Additionally, if you're switching to a heat pump, federal 25C tax credits (up to $2,000) can offset costs.
Common Furnace Problems in Taylors
Flame Sensor Failure
A dirty or faulty flame sensor is a frequent issue, causing the furnace to shut off after ignition. Repair costs $70–$225.
Igniter Problems
A broken igniter prevents the furnace from starting. Replacement typically runs $125–$375.
Blower Motor Malfunction
A failing blower motor reduces airflow and efficiency. Replacement costs $350–$1,300.
Furnace Repair FAQs — Taylors
Yes, South Carolina requires a mechanical permit for furnace repair work. Your contractor should handle the permit, which may add to the total cost.
Furnace Repair near Taylors
Get a furnace repair quote.
No heat? Compare licensed local pros fast.