Furnace Repair in Columbia
Get fast, fair pricing from licensed local pros. Typical Columbia cost: $70 – $225 installed.
- Flame sensor
- $70 – $225
- Igniter
- $125 – $400
- Blower motor
- $350 – $1.3k
- Control board
- $250 – $700
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Columbia repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair in Columbia, Tennessee typically costs between $70 and $3,100 depending on the part and labor. With a median home age of 48 years, older furnaces often need repairs like flame sensor or blower motor replacement. Tennessee requires a mechanical permit for furnace work, and a diagnostic fee of $65–$175 is standard. Most homes use electric heating, so a heat pump may be a more efficient long-term choice. Federal tax credits (25C) can offset up to $2,000 for qualifying heat pumps.
- Diagnostic / service callOften credited toward the repair$65 – $175
- Flame sensor or thermocoupleCommon no-heat cause on gas units$70 – $225
- Hot-surface igniterFurnace clicks but won’t light$125 – $400
- Blower motorNo airflow / weak airflow$350 – $1,300
- Heat exchangerCracked exchanger often means replace$1,300 – $3,100+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Columbia
U.S. Census ACS- Households
- 16,990
- Homeowners
- 10,895
- 57% own
- Median home value
- $235,800
- Median income
- $58,110
- Median home built
- 1978
- Housing units
- 19,061
With a median home built in 1978, many Columbia AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Columbia?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Columbia.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Columbia
Given Tennessee’s mixed-humid climate and electric heating, high-seer2 heat pump is the sensible default for most Columbia homes. A pro can confirm the right size and system for your home with a load calculation.
Sources: TVA EnergyRight Residential Heat Pump Rebate · TN.gov State Energy Office - Home Energy Rebate Programs · EnergySage Tennessee Electricity Rates
What Columbia code requires
Installing or replacing an HVAC system in Columbia follows Tennessee rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum14.3 SEER2 (Southeast, <45k BTU)
Federal Southeast-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Most TVA EnergyRight HVAC rebates require the home's primary heating to be electric and the work to be done by a Quality Contractor Network member.
Sources: TVA EnergyRight Residential Heat Pump Rebate · TN.gov State Energy Office - Home Energy Rebate Programs · EnergySage Tennessee Electricity Rates
Not sure which rules and rebates apply to your home?
A licensed Columbia pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Columbia
Tennessee heating is mostly electric, which shapes the money back:
- StateUp to $1,500TVA EnergyRight High-Efficiency Heat Pump Rebate →
State or utility program — verify eligibility before you buy.
- StateUp to $700TVA EnergyRight High-Efficiency Central AC Rebate →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Tennessee.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Columbia, explained.
What affects furnace repair costs in Columbia?
In Columbia, repair prices vary by part and labor. Common repairs like flame sensors ($70–$225) are more affordable, while blower motors ($350–$1,300) or heat exchangers ($1,300–$3,100+) cost more due to complexity. The age of your furnace (average 48 years) may increase labor time. Tennessee's permit requirement adds a small fee. If your primary heat is electric, TVA EnergyRight rebates may apply only through a Quality Contractor Network member.
Common furnace repairs in Columbia
Flame sensor failure
A dirty or faulty flame sensor prevents ignition. Cost: $70–$225.
Blower motor malfunction
The motor that circulates air can wear out. Cost: $350–$1,300.
Igniter problems
A broken igniter stops the furnace from starting. Cost: $125–$400.
Furnace Repair FAQs — Columbia
Yes, Tennessee requires a mechanical permit for most furnace repairs. Your contractor should obtain it and include the cost in the estimate.
Get a furnace repair quote.
No heat? Compare licensed local pros fast.