AC Installation in Converse
Get fast, fair pricing from licensed local pros. Typical Converse cost: $3.8k – $7.6k+ installed.
- Central AC (replace)
- $3.8k – $7.6k+
- New central AC + ducts
- $5.7k – $12.5k+
- Ductless mini-split
- $2.8k – $7.6k
- Permit & inspection
- $70 – $375
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
AC installation cost by system.
Installed pricing for Converse, adjusted for local labor. Higher SEER2 tiers, larger tonnage, and new ductwork add to the base.
In Converse, Texas, AC installation costs typically range from $3,800 to $7,600 for a like-for-like central AC replacement, and $5,700 to $12,300+ if new ductwork is needed. Ductless mini-splits run $2,800–$7,600, while heat pumps—recommended for this hot-humid climate—cost $4,700–$11,400+. With a median home age of about 25 years, many homes may need system upgrades or duct modifications. All work must be performed by a TDLR-licensed contractor who pulls the required mechanical permit. Federal 25C tax credits (up to $2,000 for heat pumps, $600 for high-efficiency AC) can offset costs.
- Central AC, like-for-likeExisting ducts in good shape$3,800 – $7,600+
- New central AC + ductworkFirst-time or full duct replacement$5,700 – $12,500+
- Ductless mini-splitSingle or multi-zone, no ducts$2,800 – $7,600
- Heat pump (cooling + heating)Qualifies for federal & local rebates$4,700 – $11,500+
- Permit & inspectionRequired in most jurisdictions$70 – $375
* High-efficiency systems cost more upfront but may qualify for federal tax credits and utility rebates.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Converse
U.S. Census ACS- Households
- 11,221
- Homeowners
- 7,227
- 74% own
- Median home value
- $216,100
- Median income
- $77,237
- Median home built
- 2001
- Housing units
- 9,836
With a median home built in 2001, many Converse AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Converse?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.

What’s different about Converse.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Converse
Given Texas’s hot-humid climate and mixed heating, high-seer2 heat pump is the sensible default for most Converse homes. With a long, hard cooling season here, stepping up the SEER2 tier pays back through lower summer bills. A pro can confirm the right size and system for your home with a load calculation.
Sources: SEER2 Southeast region standards (Texas) · Texas heat pump rebates by utility 2026 · Texas HVAC permit requirements
What Converse code requires
Installing or replacing an HVAC system in Converse follows Texas rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum14.3 SEER2 (Southeast, <45k BTU)
Federal Southeast-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
HVAC work must be done by a TDLR-licensed Air Conditioning & Refrigeration contractor, and the licensed contractor (not the homeowner) pulls the required mechanical permit.
Sources: SEER2 Southeast region standards (Texas) · Texas heat pump rebates by utility 2026 · Texas HVAC permit requirements
Not sure which rules and rebates apply to your home?
A licensed Converse pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Converse
Texas heating is mostly mixed, which shapes the money back:
- Stateup to ~$3,000 (ENERGY STAR heat pump, participating contractor)Austin Energy Home Energy Improvement / Power Saver heat pump rebate →
State or utility program — verify eligibility before you buy.
- Stateapprox $100-$275 per tonCPS Energy heat pump / high-efficiency AC rebate (SEER2 15.2+) →
State or utility program — verify eligibility before you buy.
- Stateup to ~$600 (ENERGY STAR equipment, licensed contractor)Oncor Take a Load Off Texas energy efficiency program →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Texas.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
AC Installation in Converse, explained.
What Affects AC Installation Cost in Converse
System type is the main driver: heat pumps and systems with new ductwork cost more than simple central AC swaps. Older homes (median built 2001) may require duct repairs or upgrades to meet current codes. Permit fees and load calculations add to the base price. Higher-efficiency units qualify for federal tax credits but have a higher upfront cost. Contractor labor rates and the complexity of installation (e.g., attic access, electrical work) also influence the final price.
Common AC Installation Issues in Converse
Undersized Ductwork
Many homes built around 2001 have ductwork designed for older, less efficient systems, which may not handle modern high-SEER units or heat pumps properly.
Permit Compliance
Texas requires a mechanical permit for AC installation; only a TDLR-licensed contractor can pull it. Homeowners cannot self-permit, and failing to do so can lead to fines or inspection issues.
Refrigerant Transition
With R-410A being phased down after 2025, new installations must use R-454B or R-32, which may require compatible equipment and affect service costs.
AC Installation FAQs — Converse
Yes, Texas law requires a mechanical permit for AC installation. Only a TDLR-licensed Air Conditioning & Refrigeration contractor can pull the permit—homeowners cannot do it themselves.
AC Installation near Converse
Get an AC installation quote.
New system or replacement — compare licensed local pros.