HVAC Near You
Call
Furnace Repair · Near Me

Furnace Repair in Coppell

Get fast, fair pricing from licensed local pros. Typical Coppell cost: $80 – $250 installed.

Call now: (855) 321-3116
Licensed & insured Upfront pricing Same-day service
Flame sensor
$80 – $250
Igniter
$150 – $450
Blower motor
$400 – $1.5k
Control board
$300 – $800
0%sizing
Dialing inStep 1 of 3
Instant cost estimate

What's going on with your HVAC system?

  • Licensed
    & fully insured
  • Same-day
    service available
  • Upfront
    pricing, no pressure
  • Local
    pros, nationwide
Coppell pricing

Furnace repair cost by part.

Typical Coppell repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.

In Coppell, Texas, furnace repair costs reflect the local mix of older homes (median built 1993) and a hot-humid climate. Typical diagnostic fees run $75–$200, with common repairs like flame sensor ($80–$250), igniter ($150–$450), or blower motor ($400–$1,500). Since Texas requires a TDLR-licensed contractor to pull a mechanical permit, labor and permit fees are included in most quotes. Given the high cooling demand, many homeowners choose heat pumps for year-round efficiency, which may affect furnace repair needs.

  • Diagnostic / service call
    Often credited toward the repair
    $75 – $200
  • Flame sensor or thermocouple
    Common no-heat cause on gas units
    $80 – $250
  • Hot-surface igniter
    Furnace clicks but won’t light
    $150 – $450
  • Blower motor
    No airflow / weak airflow
    $400 – $1,500
  • Heat exchanger
    Cracked exchanger often means replace
    $1,500 – $3,500+

* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.

Pricing reviewed · Local data from U.S. Census ACS

HVAC systems in Coppell

U.S. Census ACS
Households
17,005
Homeowners
11,012
69% own
Median home value
$489,700
Median income
$143,817
Median home built
1993
Housing units
16,006

With a median home built in 1993, many Coppell AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.

Talk to a local pro

Ready to get your HVAC system serviced in Coppell?

Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.

  • Licensed & insured
  • Same-day availability
  • Upfront, no-pressure pricing
  • Local pros near you
Call now: (855) 321-3116

No obligation — talk through your options.

Licensed technician servicing an HVAC system
Local guide · Coppell

What’s different about Coppell.

Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.

Recommended unit for Coppell

High-SEER2 heat pump

Given Texas’s hot-humid climate and mixed heating, high-seer2 heat pump is the sensible default for most Coppell homes. With a long, hard cooling season here, stepping up the SEER2 tier pays back through lower summer bills. A pro can confirm the right size and system for your home with a load calculation.

Sources: SEER2 Southeast region standards (Texas) · Texas heat pump rebates by utility 2026 · Texas HVAC permit requirements

What Coppell code requires

Installing or replacing an HVAC system in Coppell follows Texas rules under the state mechanical code. Here’s what applies statewide:

  • Permit

    Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.

    Required
  • SEER2 minimum

    Federal Southeast-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.

    14.3 SEER2 (Southeast, <45k BTU)
  • Load calculation

    Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.

    Recommended
  • Refrigerant
    R-454B / R-32 (R-410A phased down 2025+)
  • Good to know

    HVAC work must be done by a TDLR-licensed Air Conditioning & Refrigeration contractor, and the licensed contractor (not the homeowner) pulls the required mechanical permit.

    —

Sources: SEER2 Southeast region standards (Texas) · Texas heat pump rebates by utility 2026 · Texas HVAC permit requirements

Talk to a local pro

Not sure which rules and rebates apply to your home?

A licensed Coppell pro will walk you through code, the right unit, and what you can claim back — in one quick call.

Call now: (855) 321-3116

No obligation — talk through your options.

Money back in Coppell

Texas heating is mostly mixed, which shapes the money back:

The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Texas.

How it works

Comfort back in three steps.

  1. 1

    Tell us what’s wrong

    Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.

  2. 2

    Get matched with a local pro

    We connect you with a licensed, insured HVAC technician near you — often the same day.

  3. 3

    Repair or replace, fast

    Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.

Local insight · Coppell

Furnace Repair in Coppell, explained.

What moves the price

What Drives Furnace Repair Costs in Coppell?

Prices vary by the part needed—control boards ($300–$800) and heat exchangers ($1,500–$3,500+) cost more than sensors. Older homes (33 years average) may have outdated systems that require extra labor. The hot-humid climate means furnaces often run less, but when they fail, repairs can be urgent. Licensed contractors must pull permits, adding $50–$150 to the job. Choosing a heat pump instead of a furnace may shift future repair costs.

Common Furnace Repairs in Coppell

1

Flame Sensor Failure

A dirty or worn flame sensor prevents ignition, common in older furnaces. Repair cost: $80–$250.

2

Igniter Problems

A cracked or failed igniter stops the furnace from lighting. Replacement runs $150–$450.

3

Blower Motor Issues

A faulty blower motor reduces airflow or causes noise. Repair cost: $400–$1,500.

FAQ

Furnace Repair FAQs — Coppell

Yes, Texas requires a mechanical permit for most furnace repairs. Your TDLR-licensed contractor must pull the permit, which typically costs $50–$150 and is included in the quote.

Furnace Repair near Coppell

Get a furnace repair quote.

No heat? Compare licensed local pros fast.

(855) 321-3116 Available now · Same-day service
Call now: (855) 321-3116

Upfront pricing Same-day Licensed