HVAC Near You
Call
AC Installation · Near Me

AC Installation in Greenville

Get fast, fair pricing from licensed local pros. Typical Greenville cost: $3.5k – $7.1k+ installed.

Licensed & insured Upfront pricing Same-day service
Central AC (replace)
$3.5k – $7.1k+
New central AC + ducts
$5.3k – $11.5k+
Ductless mini-split
$2.6k – $7.1k
Permit & inspection
$65 – $350
0%sizing
Dialing inStep 1 of 3
Instant cost estimate

What's going on with your HVAC system?

  • Licensed
    & fully insured
  • Same-day
    service available
  • Upfront
    pricing, no pressure
  • Local
    pros, nationwide
Greenville pricing

AC installation cost by system.

Installed pricing for Greenville, adjusted for local labor. Higher SEER2 tiers, larger tonnage, and new ductwork add to the base.

In Greenville, Texas, AC installation costs typically range from $3,500 to $11,500+ depending on system type and scope. With a median home age of 47 years, many homes need new ductwork or system upgrades. The hot-humid climate means high cooling demand, making a heat pump a strong fit for year-round efficiency. Texas requires a TDLR-licensed contractor to pull a mechanical permit for any AC installation. Federal 25C tax credits offer up to $2,000 for qualifying heat pumps and up to $600 for high-efficiency central AC, helping offset costs.

  • Central AC, like-for-like
    Existing ducts in good shape
    $3,500 – $7,100+
  • New central AC + ductwork
    First-time or full duct replacement
    $5,300 – $11,500+
  • Ductless mini-split
    Single or multi-zone, no ducts
    $2,600 – $7,100
  • Heat pump (cooling + heating)
    Qualifies for federal & local rebates
    $4,400 – $10,500+
  • Permit & inspection
    Required in most jurisdictions
    $65 – $350

* High-efficiency systems cost more upfront but may qualify for federal tax credits and utility rebates.

Pricing reviewed · Local data from U.S. Census ACS

HVAC systems in Greenville

U.S. Census ACS
Households
11,569
Homeowners
5,529
45% own
Median home value
$170,800
Median income
$60,510
Median home built
1979
Housing units
12,228

With a median home built in 1979, many Greenville AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.

Talk to a local pro

Ready to get your HVAC system serviced in Greenville?

Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.

  • Licensed & insured
  • Same-day availability
  • Upfront, no-pressure pricing
  • Local pros near you
Call now: (855) 321-3116

No obligation — talk through your options.

Licensed technician servicing an HVAC system
Local guide · Greenville

What’s different about Greenville.

Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.

Recommended unit for Greenville

High-SEER2 heat pump

Given Texas’s hot-humid climate and mixed heating, high-seer2 heat pump is the sensible default for most Greenville homes. With a long, hard cooling season here, stepping up the SEER2 tier pays back through lower summer bills. A pro can confirm the right size and system for your home with a load calculation.

Sources: SEER2 Southeast region standards (Texas) · Texas heat pump rebates by utility 2026 · Texas HVAC permit requirements

What Greenville code requires

Installing or replacing an HVAC system in Greenville follows Texas rules under the state mechanical code. Here’s what applies statewide:

  • Permit

    Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.

    Required
  • SEER2 minimum

    Federal Southeast-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.

    14.3 SEER2 (Southeast, <45k BTU)
  • Load calculation

    Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.

    Recommended
  • Refrigerant
    R-454B / R-32 (R-410A phased down 2025+)
  • Good to know

    HVAC work must be done by a TDLR-licensed Air Conditioning & Refrigeration contractor, and the licensed contractor (not the homeowner) pulls the required mechanical permit.

Sources: SEER2 Southeast region standards (Texas) · Texas heat pump rebates by utility 2026 · Texas HVAC permit requirements

Talk to a local pro

Not sure which rules and rebates apply to your home?

A licensed Greenville pro will walk you through code, the right unit, and what you can claim back — in one quick call.

Call now: (855) 321-3116

No obligation — talk through your options.

Money back in Greenville

Texas heating is mostly mixed, which shapes the money back:

The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Texas.

How it works

Comfort back in three steps.

  1. 1

    Tell us what’s wrong

    Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.

  2. 2

    Get matched with a local pro

    We connect you with a licensed, insured HVAC technician near you — often the same day.

  3. 3

    Repair or replace, fast

    Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.

Local insight · Greenville

AC Installation in Greenville, explained.

What moves the price

What Affects AC Installation Cost in Greenville

Prices vary by system type: central AC like-for-like runs $3,500–$7,100, while adding ductwork increases to $5,300–$11,500+. Ductless mini-splits range $2,600–$7,100, and heat pumps $4,400–$10,600+. Older homes may require electrical upgrades or load calculations, adding to labor. The required permit and licensed contractor fees also factor in. Choosing a heat pump can qualify for federal tax credits, reducing net cost.

Common AC Installation Issues in Greenville

1

Older Ductwork

Many homes built in 1979 have aging ducts that need replacement or sealing, adding $1,800–$3,000+ to installation.

2

Permit Compliance

Texas requires a TDLR-licensed contractor to pull a mechanical permit; unpermitted work can cause code violations and insurance issues.

3

Refrigerant Transition

New systems use R-454B or R-32 as R-410A is phased out; installers must handle proper disposal and system compatibility.

FAQ

AC Installation FAQs — Greenville

Yes, Texas requires a mechanical permit for AC installation. Your licensed contractor must pull the permit before work begins.

AC Installation near Greenville

Get an AC installation quote.

New system or replacement — compare licensed local pros.

(855) 321-3116 Available now · Same-day service
Call now: (855) 321-3116

Upfront pricing Same-day Licensed