Furnace Repair in Haltom City
Get fast, fair pricing from licensed local pros. Typical Haltom City cost: $70 – $225 installed.
- Flame sensor
- $70 – $225
- Igniter
- $125 – $400
- Blower motor
- $350 – $1.3k
- Control board
- $250 – $700
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Haltom City repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair in Haltom City typically costs between $65 and $175 for a diagnostic fee, plus labor and parts. With many homes built around 1976, older systems often need repairs like flame sensor or igniter replacements. Local HVAC work requires a TDLR-licensed contractor who pulls the required mechanical permit. Given the hot-humid climate and mixed heating needs, a heat pump is a recommended system choice for efficiency. Federal 25C tax credits (up to $2,000 for heat pumps) are available.
- Diagnostic / service callOften credited toward the repair$65 – $175
- Flame sensor or thermocoupleCommon no-heat cause on gas units$70 – $225
- Hot-surface igniterFurnace clicks but won’t light$125 – $400
- Blower motorNo airflow / weak airflow$350 – $1,300
- Heat exchangerCracked exchanger often means replace$1,300 – $3,000+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Haltom City
U.S. Census ACS- Households
- 18,308
- Homeowners
- 8,643
- 49% own
- Median home value
- $176,300
- Median income
- $57,649
- Median home built
- 1976
- Housing units
- 17,754
With a median home built in 1976, many Haltom City AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Haltom City?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Haltom City.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Haltom City
Given Texas’s hot-humid climate and mixed heating, high-seer2 heat pump is the sensible default for most Haltom City homes. With a long, hard cooling season here, stepping up the SEER2 tier pays back through lower summer bills. A pro can confirm the right size and system for your home with a load calculation.
Sources: SEER2 Southeast region standards (Texas) · Texas heat pump rebates by utility 2026 · Texas HVAC permit requirements
What Haltom City code requires
Installing or replacing an HVAC system in Haltom City follows Texas rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum14.3 SEER2 (Southeast, <45k BTU)
Federal Southeast-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
HVAC work must be done by a TDLR-licensed Air Conditioning & Refrigeration contractor, and the licensed contractor (not the homeowner) pulls the required mechanical permit.
Sources: SEER2 Southeast region standards (Texas) · Texas heat pump rebates by utility 2026 · Texas HVAC permit requirements
Not sure which rules and rebates apply to your home?
A licensed Haltom City pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Haltom City
Texas heating is mostly mixed, which shapes the money back:
- Stateup to ~$3,000 (ENERGY STAR heat pump, participating contractor)Austin Energy Home Energy Improvement / Power Saver heat pump rebate →
State or utility program — verify eligibility before you buy.
- Stateapprox $100-$275 per tonCPS Energy heat pump / high-efficiency AC rebate (SEER2 15.2+) →
State or utility program — verify eligibility before you buy.
- Stateup to ~$600 (ENERGY STAR equipment, licensed contractor)Oncor Take a Load Off Texas energy efficiency program →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Texas.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Haltom City, explained.
What Affects Furnace Repair Costs in Haltom City
Prices vary by the specific part needed: flame sensor ($70–$225), igniter ($125–$400), blower motor ($350–$1,300), control board ($250–$700), or heat exchanger ($1,300–$3,000+). Labor rates reflect the licensed contractor's overhead and permit costs. Older homes (median built 1976) may have harder-to-access systems, increasing labor time. The hot-humid climate also means furnaces work harder, potentially leading to more frequent repairs.
Common Furnace Problems in Haltom City
Flame Sensor Failure
A dirty or faulty flame sensor can cause the furnace to shut off after ignition. This is a common issue in older systems.
Igniter Malfunction
A broken igniter prevents the furnace from lighting, often due to age or power surges.
Blower Motor Issues
A failing blower motor reduces airflow, leading to uneven heating or system overheating.
Furnace Repair FAQs — Haltom City
Yes, Texas requires a mechanical permit for most furnace repairs. Your TDLR-licensed contractor must pull the permit before starting work.
Furnace Repair near Haltom City
Get a furnace repair quote.
No heat? Compare licensed local pros fast.