How much does an AC tune-up cost in Henderson?

A single tune-up runs $60–$150, coil cleaning adds $80–$325, and annual plans (2 visits) cost $125–$275.

Should I get a tune-up before summer?

Yes, spring is ideal to ensure your system handles Henderson's high cooling demand. Early booking avoids peak-season delays.

What does a tune-up include?

Typically: inspect and clean coils, check refrigerant, test capacitors, lubricate motors, verify airflow, and inspect electrical connections.

Can I do AC maintenance myself?

Basic tasks like changing filters are fine, but full tune-ups require a TDLR-licensed contractor to handle refrigerant and electrical components safely.

Do I need a permit to install AC in Henderson?

In Texas, a mechanical permit is generally required for an AC or heat pump install. Your licensed HVAC contractor pulls it; it covers the equipment, refrigerant, and electrical disconnect.

AC Maintenance · Near Me

AC Maintenance in Henderson

Q: Do I need a permit for AC maintenance in Henderson?

A mechanical permit is required for any repair or replacement, but not for routine maintenance. Your licensed contractor handles permits for repairs.

Q: Which HVAC rebates can I get in Henderson?

The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Texas. Federal 25C credits add 30% of cost (up to $2,000 for a heat pump, $600 for a high-efficiency AC) on top.

Get fast, fair pricing from licensed local pros. Typical Henderson cost: $60 – $150 installed.

Call now: (855) 321-3116

Licensed & insured Upfront pricing Same-day service

AC tune-up (single): $60 – $150
Coil cleaning: $80 – $325
Refrigerant top-off: $125 – $325
Annual plan (2 visits): $125 – $275

0%sizing

Dialing inStep 1 of 3

Instant cost estimate

What's going on with your HVAC system?

Licensed
& fully insured
Same-day
service available
Upfront
pricing, no pressure
Local
pros, nationwide

Henderson pricing

AC maintenance & tune-up cost.

Typical Henderson pricing for seasonal service, adjusted for local labor. Plans that bundle two visits a year lower the per-visit cost.

In Henderson, Texas, AC maintenance costs typically range from $60 to $150 for a single tune-up, with coil cleaning adding $80–$325. Annual maintenance plans (two visits) run $125–$275. Henderson's older homes (median built 1972) and hot-humid climate mean your AC works hard, making regular tune-ups essential to prevent breakdowns. All HVAC work must be done by a TDLR-licensed contractor, who pulls the required mechanical permit. For efficiency, consider a heat pump to qualify for the federal 25C tax credit (30%, up to $2,000).

AC tune-up (single visit)
Inspect, clean, test, calibrate
$60 – $150
Condenser coil cleaning
Restores efficiency on a dirty unit
$80 – $325
Refrigerant top-off
If pressures read low
$125 – $325
Annual maintenance plan
Spring AC + fall heating, priority service
$125 – $275
Capacitor (if weak)
Replaced proactively when out of spec
$125 – $325

* A yearly tune-up protects the manufacturer warranty and keeps efficiency from drifting down.

Pricing reviewed June 2026 · Local data from U.S. Census ACS

HVAC systems in Henderson

U.S. Census ACS

Households: 5,335
Homeowners: 2,594; 54% own
Median home value: $150,000
Median income: $55,263
Median home built: 1972
Housing units: 4,809

With a median home built in 1972, many Henderson AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.

Talk to a local pro

Ready to get your HVAC system serviced in Henderson?

Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.

Licensed & insured
Same-day availability
Upfront, no-pressure pricing
Local pros near you

Call now: (855) 321-3116

No obligation — talk through your options.

Licensed technician servicing an HVAC system

Local guide · Henderson

What’s different about Henderson.

Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.

Recommended unit for Henderson

High-SEER2 heat pump

Given Texas’s hot-humid climate and mixed heating, high-seer2 heat pump is the sensible default for most Henderson homes. With a long, hard cooling season here, stepping up the SEER2 tier pays back through lower summer bills. A pro can confirm the right size and system for your home with a load calculation.

Sources: SEER2 Southeast region standards (Texas) · Texas heat pump rebates by utility 2026 · Texas HVAC permit requirements

What Henderson code requires

Installing or replacing an HVAC system in Henderson follows Texas rules under the state mechanical code. Here’s what applies statewide:

Permit
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
Required
SEER2 minimum
Federal Southeast-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
14.3 SEER2 (Southeast, <45k BTU)
Load calculation
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
Recommended
Refrigerant
R-454B / R-32 (R-410A phased down 2025+)
Good to know
HVAC work must be done by a TDLR-licensed Air Conditioning & Refrigeration contractor, and the licensed contractor (not the homeowner) pulls the required mechanical permit.
—

Sources: SEER2 Southeast region standards (Texas) · Texas heat pump rebates by utility 2026 · Texas HVAC permit requirements

Talk to a local pro

Not sure which rules and rebates apply to your home?

A licensed Henderson pro will walk you through code, the right unit, and what you can claim back — in one quick call.

Call now: (855) 321-3116

No obligation — talk through your options.

Money back in Henderson

Texas heating is mostly mixed, which shapes the money back:

State
up to ~$3,000 (ENERGY STAR heat pump, participating contractor)
Austin Energy Home Energy Improvement / Power Saver heat pump rebate →
State or utility program — verify eligibility before you buy.
State
approx $100-$275 per ton
CPS Energy heat pump / high-efficiency AC rebate (SEER2 15.2+) →
State or utility program — verify eligibility before you buy.
State
up to ~$600 (ENERGY STAR equipment, licensed contractor)
Oncor Take a Load Off Texas energy efficiency program →
State or utility program — verify eligibility before you buy.
Federal
30% of cost, up to $2,000
Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.

The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Texas.

How it works

Comfort back in three steps.

1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.

Local insight · Henderson