HVAC Near You
Call
AC Installation · Near Me

AC Installation in Keller

Get fast, fair pricing from licensed local pros. Typical Keller cost: $4k – $8.1k+ installed.

Call now: (855) 321-3116
Licensed & insured Upfront pricing Same-day service
Central AC (replace)
$4k – $8.1k+
New central AC + ducts
$6.1k – $13k+
Ductless mini-split
$3k – $8.1k
Permit & inspection
$75 – $400
0%sizing
Dialing inStep 1 of 3
Instant cost estimate

What's going on with your HVAC system?

  • Licensed
    & fully insured
  • Same-day
    service available
  • Upfront
    pricing, no pressure
  • Local
    pros, nationwide
Keller pricing

AC installation cost by system.

Installed pricing for Keller, adjusted for local labor. Higher SEER2 tiers, larger tonnage, and new ductwork add to the base.

In Keller, Texas, where the median home was built in 1998 and summer cooling demand is high, AC installation is a common upgrade. Typical costs for a like-for-like central AC replacement range from $4,000 to $8,100+, while a new system with ductwork runs $6,100 to $13,200+. Ductless mini-splits and heat pumps are also options, with heat pumps qualifying for federal tax credits. All work must be performed by a TDLR-licensed contractor who pulls the required mechanical permit. Given Keller's hot-humid climate and high homeownership rate (81.1%), investing in a high-efficiency system can improve comfort and energy savings.

  • Central AC, like-for-like
    Existing ducts in good shape
    $4,000 – $8,100+
  • New central AC + ductwork
    First-time or full duct replacement
    $6,100 – $13,000+
  • Ductless mini-split
    Single or multi-zone, no ducts
    $3,000 – $8,100
  • Heat pump (cooling + heating)
    Qualifies for federal & local rebates
    $5,100 – $12,000+
  • Permit & inspection
    Required in most jurisdictions
    $75 – $400

* High-efficiency systems cost more upfront but may qualify for federal tax credits and utility rebates.

Pricing reviewed · Local data from U.S. Census ACS

HVAC systems in Keller

U.S. Census ACS
Households
18,128
Homeowners
13,314
81% own
Median home value
$484,200
Median income
$162,094
Median home built
1998
Housing units
16,407

With a median home built in 1998, many Keller AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.

Talk to a local pro

Ready to get your HVAC system serviced in Keller?

Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.

  • Licensed & insured
  • Same-day availability
  • Upfront, no-pressure pricing
  • Local pros near you
Call now: (855) 321-3116

No obligation — talk through your options.

Licensed technician servicing an HVAC system
Local guide · Keller

What’s different about Keller.

Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.

Recommended unit for Keller

High-SEER2 heat pump

Given Texas’s hot-humid climate and mixed heating, high-seer2 heat pump is the sensible default for most Keller homes. With a long, hard cooling season here, stepping up the SEER2 tier pays back through lower summer bills. A pro can confirm the right size and system for your home with a load calculation.

Sources: SEER2 Southeast region standards (Texas) · Texas heat pump rebates by utility 2026 · Texas HVAC permit requirements

What Keller code requires

Installing or replacing an HVAC system in Keller follows Texas rules under the state mechanical code. Here’s what applies statewide:

  • Permit

    Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.

    Required
  • SEER2 minimum

    Federal Southeast-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.

    14.3 SEER2 (Southeast, <45k BTU)
  • Load calculation

    Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.

    Recommended
  • Refrigerant
    R-454B / R-32 (R-410A phased down 2025+)
  • Good to know

    HVAC work must be done by a TDLR-licensed Air Conditioning & Refrigeration contractor, and the licensed contractor (not the homeowner) pulls the required mechanical permit.

    —

Sources: SEER2 Southeast region standards (Texas) · Texas heat pump rebates by utility 2026 · Texas HVAC permit requirements

Talk to a local pro

Not sure which rules and rebates apply to your home?

A licensed Keller pro will walk you through code, the right unit, and what you can claim back — in one quick call.

Call now: (855) 321-3116

No obligation — talk through your options.

Money back in Keller

Texas heating is mostly mixed, which shapes the money back:

The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Texas.

How it works

Comfort back in three steps.

  1. 1

    Tell us what’s wrong

    Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.

  2. 2

    Get matched with a local pro

    We connect you with a licensed, insured HVAC technician near you — often the same day.

  3. 3

    Repair or replace, fast

    Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.

Local insight · Keller

AC Installation in Keller, explained.

What moves the price

What Affects AC Installation Costs in Keller

Prices vary based on system type (central AC, heat pump, or ductless), efficiency rating (SEER2), and whether ductwork is needed. Labor costs reflect the licensed contractor's overhead and permit fees. The federal 25C tax credit offers up to $2,000 for qualifying heat pumps and up to $600 for high-efficiency central AC, which can offset upfront costs. Older homes may require duct modifications or load calculations, adding to the price.

Common AC Installation Issues in Keller

1

Permit and Code Compliance

Texas requires a mechanical permit for AC installation, and only a TDLR-licensed contractor can pull it. Unpermitted work can lead to fines or issues during home sale.

2

Refrigerant Transition

As of 2025, R-410A is being phased down in favor of R-454B or R-32. New installations must use the approved refrigerants, which may affect system selection and cost.

3

Older Ductwork

Many Keller homes built in 1998 have aging ductwork that may need replacement or sealing to ensure efficient operation, adding to the overall project cost.

FAQ

AC Installation FAQs — Keller

Yes, Texas law requires a mechanical permit for AC installation. Your licensed contractor must pull the permit before starting work.

AC Installation near Keller

Get an AC installation quote.

New system or replacement — compare licensed local pros.

(855) 321-3116 Available now · Same-day service
Call now: (855) 321-3116

Upfront pricing Same-day Licensed