HVAC Near You
Call
Furnace Repair · Near Me

Furnace Repair in Mansfield

Get fast, fair pricing from licensed local pros. Typical Mansfield cost: $90 – $275 installed.

Call now: (855) 321-3116
Licensed & insured Upfront pricing Same-day service
Flame sensor
$90 – $275
Igniter
$175 – $500
Blower motor
$450 – $1.6k
Control board
$325 – $900
0%sizing
Dialing inStep 1 of 3
Instant cost estimate

What's going on with your HVAC system?

  • Licensed
    & fully insured
  • Same-day
    service available
  • Upfront
    pricing, no pressure
  • Local
    pros, nationwide
Mansfield pricing

Furnace repair cost by part.

Typical Mansfield repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.

In Mansfield, TX, furnace repair costs typically range from $90 for a flame sensor replacement to over $3,900 for a heat exchanger, plus a diagnostic fee of $85–$225. With a median home age of 23 years and a hot-humid climate, many homes rely on heat pumps for heating and cooling. All work must be performed by a TDLR-licensed contractor who pulls a mechanical permit, ensuring code compliance. Local median household income of $112,465 supports investment in reliable repairs.

  • Diagnostic / service call
    Often credited toward the repair
    $85 – $225
  • Flame sensor or thermocouple
    Common no-heat cause on gas units
    $90 – $275
  • Hot-surface igniter
    Furnace clicks but won’t light
    $175 – $500
  • Blower motor
    No airflow / weak airflow
    $450 – $1,650
  • Heat exchanger
    Cracked exchanger often means replace
    $1,650 – $3,900+

* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.

Pricing reviewed · Local data from U.S. Census ACS

HVAC systems in Mansfield

U.S. Census ACS
Households
29,472
Homeowners
18,054
73% own
Median home value
$354,100
Median income
$112,465
Median home built
2003
Housing units
24,863

With a median home built in 2003, many Mansfield AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.

Talk to a local pro

Ready to get your HVAC system serviced in Mansfield?

Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.

  • Licensed & insured
  • Same-day availability
  • Upfront, no-pressure pricing
  • Local pros near you
Call now: (855) 321-3116

No obligation — talk through your options.

Licensed technician servicing an HVAC system
Local guide · Mansfield

What’s different about Mansfield.

Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.

Recommended unit for Mansfield

High-SEER2 heat pump

Given Texas’s hot-humid climate and mixed heating, high-seer2 heat pump is the sensible default for most Mansfield homes. With a long, hard cooling season here, stepping up the SEER2 tier pays back through lower summer bills. A pro can confirm the right size and system for your home with a load calculation.

Sources: SEER2 Southeast region standards (Texas) · Texas heat pump rebates by utility 2026 · Texas HVAC permit requirements

What Mansfield code requires

Installing or replacing an HVAC system in Mansfield follows Texas rules under the state mechanical code. Here’s what applies statewide:

  • Permit

    Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.

    Required
  • SEER2 minimum

    Federal Southeast-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.

    14.3 SEER2 (Southeast, <45k BTU)
  • Load calculation

    Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.

    Recommended
  • Refrigerant
    R-454B / R-32 (R-410A phased down 2025+)
  • Good to know

    HVAC work must be done by a TDLR-licensed Air Conditioning & Refrigeration contractor, and the licensed contractor (not the homeowner) pulls the required mechanical permit.

    —

Sources: SEER2 Southeast region standards (Texas) · Texas heat pump rebates by utility 2026 · Texas HVAC permit requirements

Talk to a local pro

Not sure which rules and rebates apply to your home?

A licensed Mansfield pro will walk you through code, the right unit, and what you can claim back — in one quick call.

Call now: (855) 321-3116

No obligation — talk through your options.

Money back in Mansfield

Texas heating is mostly mixed, which shapes the money back:

The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Texas.

How it works

Comfort back in three steps.

  1. 1

    Tell us what’s wrong

    Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.

  2. 2

    Get matched with a local pro

    We connect you with a licensed, insured HVAC technician near you — often the same day.

  3. 3

    Repair or replace, fast

    Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.

Local insight · Mansfield

Furnace Repair in Mansfield, explained.

What moves the price

What Drives Furnace Repair Costs in Mansfield?

Prices vary by the specific component needing repair: flame sensors ($90–$275) and igniters ($175–$500) are more affordable, while blower motors ($450–$1,650) and control boards ($325–$900) cost more. Heat exchanger repairs ($1,650–$3,900+) are the most expensive due to labor and safety requirements. The mandatory mechanical permit adds a fee, and the hot-humid climate means systems work harder, potentially increasing wear. Choosing a heat pump over a gas furnace may affect repair complexity.

Common Furnace Problems in Mansfield Homes

1

Flame Sensor Failure

A dirty or faulty flame sensor causes the furnace to shut off after ignition. Typical repair cost: $90–$275.

2

Igniter Malfunction

A broken igniter prevents the furnace from lighting. Replacement runs $175–$500.

3

Blower Motor Issues

A failing blower motor reduces airflow or stops entirely. Repair costs $450–$1,650.

What to expect

What to Expect During a Furnace Repair in Mansfield

A licensed TDLR contractor will diagnose the issue (diagnostic fee $85–$225), then provide an upfront cost estimate for the repair. They will pull a mechanical permit from the city before starting work. After repair, the system is tested for proper operation. For major repairs like heat exchanger replacement, the job may require a follow-up inspection.

FAQ

Furnace Repair FAQs — Mansfield

Yes, Texas requires a mechanical permit for most furnace repairs. Your licensed contractor must pull the permit from the city before starting work.

Furnace Repair near Mansfield

Get a furnace repair quote.

No heat? Compare licensed local pros fast.

(855) 321-3116 Available now · Same-day service
Call now: (855) 321-3116

Upfront pricing Same-day Licensed