HVAC Near You
Call
Furnace Repair · Near Me

Furnace Repair in Mission

Get fast, fair pricing from licensed local pros. Typical Mission cost: $75 – $225 installed.

Call now: (855) 321-3116
Licensed & insured Upfront pricing Same-day service
Flame sensor
$75 – $225
Igniter
$150 – $425
Blower motor
$375 – $1.4k
Control board
$275 – $750
0%sizing
Dialing inStep 1 of 3
Instant cost estimate

What's going on with your HVAC system?

  • Licensed
    & fully insured
  • Same-day
    service available
  • Upfront
    pricing, no pressure
  • Local
    pros, nationwide
Mission pricing

Furnace repair cost by part.

Typical Mission repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.

Furnace repair in Mission, Texas typically costs between $75 and $3,300 depending on the component. With a median home age of 27 years, many furnaces are due for service. Local work must be performed by a TDLR-licensed contractor who pulls a mechanical permit. In Mission's hot-humid climate, heat pumps are a recommended system choice, and the federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump) may apply.

  • Diagnostic / service call
    Often credited toward the repair
    $70 – $200
  • Flame sensor or thermocouple
    Common no-heat cause on gas units
    $75 – $225
  • Hot-surface igniter
    Furnace clicks but won’t light
    $150 – $425
  • Blower motor
    No airflow / weak airflow
    $375 – $1,400
  • Heat exchanger
    Cracked exchanger often means replace
    $1,400 – $3,300+

* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.

Pricing reviewed · Local data from U.S. Census ACS

HVAC systems in Mission

U.S. Census ACS
Households
34,302
Homeowners
19,492
62% own
Median home value
$147,600
Median income
$56,421
Median home built
1999
Housing units
31,625

With a median home built in 1999, many Mission AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.

Talk to a local pro

Ready to get your HVAC system serviced in Mission?

Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.

  • Licensed & insured
  • Same-day availability
  • Upfront, no-pressure pricing
  • Local pros near you
Call now: (855) 321-3116

No obligation — talk through your options.

Licensed technician servicing an HVAC system
Local guide · Mission

What’s different about Mission.

Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.

Recommended unit for Mission

High-SEER2 heat pump

Given Texas’s hot-humid climate and mixed heating, high-seer2 heat pump is the sensible default for most Mission homes. With a long, hard cooling season here, stepping up the SEER2 tier pays back through lower summer bills. A pro can confirm the right size and system for your home with a load calculation.

Sources: SEER2 Southeast region standards (Texas) · Texas heat pump rebates by utility 2026 · Texas HVAC permit requirements

What Mission code requires

Installing or replacing an HVAC system in Mission follows Texas rules under the state mechanical code. Here’s what applies statewide:

  • Permit

    Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.

    Required
  • SEER2 minimum

    Federal Southeast-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.

    14.3 SEER2 (Southeast, <45k BTU)
  • Load calculation

    Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.

    Recommended
  • Refrigerant
    R-454B / R-32 (R-410A phased down 2025+)
  • Good to know

    HVAC work must be done by a TDLR-licensed Air Conditioning & Refrigeration contractor, and the licensed contractor (not the homeowner) pulls the required mechanical permit.

    —

Sources: SEER2 Southeast region standards (Texas) · Texas heat pump rebates by utility 2026 · Texas HVAC permit requirements

Talk to a local pro

Not sure which rules and rebates apply to your home?

A licensed Mission pro will walk you through code, the right unit, and what you can claim back — in one quick call.

Call now: (855) 321-3116

No obligation — talk through your options.

Money back in Mission

Texas heating is mostly mixed, which shapes the money back:

The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Texas.

How it works

Comfort back in three steps.

  1. 1

    Tell us what’s wrong

    Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.

  2. 2

    Get matched with a local pro

    We connect you with a licensed, insured HVAC technician near you — often the same day.

  3. 3

    Repair or replace, fast

    Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.

Local insight · Mission

Furnace Repair in Mission, explained.

What moves the price

What affects furnace repair costs in Mission?

Prices vary by the part needing repair: flame sensors ($75–$225), igniters ($150–$425), blower motors ($375–$1,400), control boards ($275–$750), and heat exchangers ($1,400–$3,300+). A diagnostic fee of $70–$200 is typical. Labor rates reflect Mission's median income of $56,421. The required mechanical permit adds a small fee, and using a TDLR-licensed contractor ensures code compliance.

Common furnace repairs in Mission

1

Flame sensor failure

A dirty or faulty flame sensor can cause the furnace to cycle on and off. Cleaning or replacement costs $75–$225.

2

Igniter problems

A cracked or worn igniter prevents the furnace from lighting. Replacement runs $150–$425.

3

Blower motor issues

A failing blower motor reduces airflow and efficiency. Repair or replacement costs $375–$1,400.

What to expect

What to expect during a furnace repair in Mission

A TDLR-licensed contractor will diagnose the issue, provide an upfront cost estimate, and pull the required mechanical permit before starting work. Repairs typically take 1–4 hours. For major components like a heat exchanger, the job may require a follow-up visit. The contractor will ensure the system meets Texas code and may recommend a heat pump upgrade for better efficiency.

FAQ

Furnace Repair FAQs — Mission

Yes, Texas requires a mechanical permit for most furnace repairs. Your TDLR-licensed contractor will pull the permit on your behalf.

Furnace Repair near Mission

Get a furnace repair quote.

No heat? Compare licensed local pros fast.

(855) 321-3116 Available now · Same-day service
Call now: (855) 321-3116

Upfront pricing Same-day Licensed