Furnace Repair in San Angelo
Get fast, fair pricing from licensed local pros. Typical San Angelo cost: $80 – $250 installed.
- Flame sensor
- $80 – $250
- Igniter
- $150 – $450
- Blower motor
- $400 – $1.4k
- Control board
- $300 – $800
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical San Angelo repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
In San Angelo, where the median home was built around 1976, furnace repair is a common need for homeowners. Typical repair costs range from $80 for a flame sensor to over $3,400 for a heat exchanger, plus a $75–$200 diagnostic fee. Texas requires a TDLR-licensed contractor to pull a mechanical permit for any furnace work. Given the hot-humid climate and mixed heating needs, a heat pump is often a well-suited choice, and the federal 25C tax credit (30%, up to $2,000) can offset costs for qualifying high-efficiency systems.
- Diagnostic / service callOften credited toward the repair$75 – $200
- Flame sensor or thermocoupleCommon no-heat cause on gas units$80 – $250
- Hot-surface igniterFurnace clicks but won’t light$150 – $450
- Blower motorNo airflow / weak airflow$400 – $1,450
- Heat exchangerCracked exchanger often means replace$1,450 – $3,400+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in San Angelo
U.S. Census ACS- Households
- 39,769
- Homeowners
- 24,596
- 56% own
- Median home value
- $171,700
- Median income
- $65,040
- Median home built
- 1976
- Housing units
- 43,576
With a median home built in 1976, many San Angelo AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in San Angelo?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about San Angelo.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for San Angelo
Given Texas’s hot-humid climate and mixed heating, high-seer2 heat pump is the sensible default for most San Angelo homes. With a long, hard cooling season here, stepping up the SEER2 tier pays back through lower summer bills. A pro can confirm the right size and system for your home with a load calculation.
Sources: SEER2 Southeast region standards (Texas) · Texas heat pump rebates by utility 2026 · Texas HVAC permit requirements
What San Angelo code requires
Installing or replacing an HVAC system in San Angelo follows Texas rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum14.3 SEER2 (Southeast, <45k BTU)
Federal Southeast-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
HVAC work must be done by a TDLR-licensed Air Conditioning & Refrigeration contractor, and the licensed contractor (not the homeowner) pulls the required mechanical permit.
Sources: SEER2 Southeast region standards (Texas) · Texas heat pump rebates by utility 2026 · Texas HVAC permit requirements
Not sure which rules and rebates apply to your home?
A licensed San Angelo pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in San Angelo
Texas heating is mostly mixed, which shapes the money back:
- Stateup to ~$3,000 (ENERGY STAR heat pump, participating contractor)Austin Energy Home Energy Improvement / Power Saver heat pump rebate →
State or utility program — verify eligibility before you buy.
- Stateapprox $100-$275 per tonCPS Energy heat pump / high-efficiency AC rebate (SEER2 15.2+) →
State or utility program — verify eligibility before you buy.
- Stateup to ~$600 (ENERGY STAR equipment, licensed contractor)Oncor Take a Load Off Texas energy efficiency program →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Texas.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in San Angelo, explained.
What affects furnace repair costs in San Angelo?
Repair costs vary by the part needed: flame sensor ($80–$250), igniter ($150–$450), blower motor ($400–$1,450), control board ($300–$800), or heat exchanger ($1,450–$3,400+). Labor rates reflect local median income ($65,040) and the need for a licensed contractor. Older homes (median built 1976) may have harder-to-access systems, increasing labor time. Permit fees and diagnostic charges also add to the total.
Common furnace problems in San Angelo
Flame sensor failure
A dirty or faulty flame sensor is a frequent issue, causing the furnace to shut off after ignition. Repair typically costs $80–$250.
Igniter malfunction
A broken igniter prevents the furnace from starting. Replacement runs $150–$450, common in older units.
Blower motor problems
A failing blower motor reduces airflow and efficiency. Repair costs $400–$1,450, often needed in homes with aging systems.
What to expect during a furnace repair in San Angelo
A licensed TDLR contractor will first diagnose the issue for a fee ($75–$200). They will provide an upfront cost estimate for the repair. If a permit is required (mechanical permit in Texas), the contractor handles it. For major repairs like a heat exchanger, the job may take a full day. After repair, the system is tested for safety and efficiency.
Furnace Repair FAQs — San Angelo
Yes, Texas requires a mechanical permit for furnace work. Your TDLR-licensed contractor must pull the permit; homeowners cannot do it themselves.
Get a furnace repair quote.
No heat? Compare licensed local pros fast.