Furnace Repair in Brigham City
Get fast, fair pricing from licensed local pros. Typical Brigham City cost: $65 – $200 installed.
- Flame sensor
- $65 – $200
- Igniter
- $125 – $375
- Blower motor
- $325 – $1.3k
- Control board
- $250 – $650
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Brigham City repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair costs in Brigham City, Utah typically range from $65 for a simple flame sensor replacement to over $2,900 for a heat exchanger. With a median home built in 1971, many homes have aging furnaces that require frequent repairs. Local HVAC technicians charge a diagnostic fee of $60–$175, and all repairs must comply with Utah mechanical permit requirements. Given the cold-dry high-desert climate, proper sizing for hard winter heating loads is critical. Most homes use gas furnaces, and a well-suited system for this area is an AC-gas furnace combination.
- Diagnostic / service callOften credited toward the repair$60 – $175
- Flame sensor or thermocoupleCommon no-heat cause on gas units$65 – $200
- Hot-surface igniterFurnace clicks but won’t light$125 – $375
- Blower motorNo airflow / weak airflow$325 – $1,250
- Heat exchangerCracked exchanger often means replace$1,250 – $2,900+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Brigham City
U.S. Census ACS- Households
- 7,841
- Homeowners
- 4,352
- 61% own
- Median home value
- $280,200
- Median income
- $63,315
- Median home built
- 1971
- Housing units
- 7,157
With a median home built in 1971, many Brigham City AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Brigham City?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Brigham City.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Brigham City
Given Utah’s cold-dry climate and gas heating, high-seer2 ac + gas furnace is the sensible default for most Brigham City homes. A pro can confirm the right size and system for your home with a load calculation.
Sources: Rocky Mountain Power - Savings & Energy Choices for Homes (Wattsmart) · SEER2 North Region efficiency standards · EIA Utah electricity profile
What Brigham City code requires
Installing or replacing an HVAC system in Brigham City follows Utah rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Cold-dry high-desert climate: equipment should be sized for hard winter heating loads, and a cold-climate (NEEP-listed) heat pump is required to earn the top Rocky Mountain Power Wattsmart rebate.
Sources: Rocky Mountain Power - Savings & Energy Choices for Homes (Wattsmart) · SEER2 North Region efficiency standards · EIA Utah electricity profile
Not sure which rules and rebates apply to your home?
A licensed Brigham City pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Brigham City
Utah heating is mostly gas, which shapes the money back:
- StateUp to $2,000 (cold-climate/NEEP-listed unit)Rocky Mountain Power Wattsmart Homes - Heat Pump →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, though it is set to expire after 2025.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Brigham City, explained.
What affects furnace repair costs in Brigham City?
Repair costs vary by the part needed: flame sensors ($65–$200), igniters ($125–$375), blower motors ($325–$1,250), control boards ($250–$650), and heat exchangers ($1,250–$2,900+). Labor rates reflect the local market, and permit fees add to the total. Older homes (median built 1971) may have harder-to-find parts or require additional labor. Seasonal demand in winter can also influence pricing.
Common furnace repairs in Brigham City
Flame sensor failure
A dirty or faulty flame sensor is a frequent issue, causing the furnace to cycle on and off. Repair cost: $65–$200.
Igniter problems
A broken igniter prevents the furnace from lighting. Replacement runs $125–$375.
Blower motor malfunction
The blower motor can fail due to age or overheating, costing $325–$1,250 to replace.
Furnace Repair FAQs — Brigham City
Yes, Utah requires a mechanical permit for most furnace repairs. Your HVAC contractor should obtain it and include the fee in the quote.
Furnace Repair near Brigham City
Get a furnace repair quote.
No heat? Compare licensed local pros fast.