Furnace Repair in Grantsville
Get fast, fair pricing from licensed local pros. Typical Grantsville cost: $75 – $225 installed.
- Flame sensor
- $75 – $225
- Igniter
- $150 – $425
- Blower motor
- $375 – $1.4k
- Control board
- $275 – $750
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Grantsville repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair in Grantsville, Utah, typically costs between $75 and $3,300 depending on the component. The local median home age of 26 years means many furnaces are due for maintenance or part replacements. Utah requires a mechanical permit for furnace work, and a diagnostic fee of $70–$175 is standard. Given the cold-dry high-desert climate, proper sizing for winter heating loads is critical. Most homes use gas furnaces, and a gas furnace with AC is the recommended system. Federal 25C tax credits (30%, up to $2,000 for heat pumps, $600 for AC) apply but expire after 2025.
- Diagnostic / service callOften credited toward the repair$70 – $175
- Flame sensor or thermocoupleCommon no-heat cause on gas units$75 – $225
- Hot-surface igniterFurnace clicks but won’t light$150 – $425
- Blower motorNo airflow / weak airflow$375 – $1,400
- Heat exchangerCracked exchanger often means replace$1,400 – $3,300+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Grantsville
U.S. Census ACS- Households
- 5,176
- Homeowners
- 2,950
- 79% own
- Median home value
- $377,000
- Median income
- $94,260
- Median home built
- 2000
- Housing units
- 3,759
With a median home built in 2000, many Grantsville AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Grantsville?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Grantsville.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Grantsville
Given Utah’s cold-dry climate and gas heating, high-seer2 ac + gas furnace is the sensible default for most Grantsville homes. A pro can confirm the right size and system for your home with a load calculation.
Sources: Rocky Mountain Power - Savings & Energy Choices for Homes (Wattsmart) · SEER2 North Region efficiency standards · EIA Utah electricity profile
What Grantsville code requires
Installing or replacing an HVAC system in Grantsville follows Utah rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Cold-dry high-desert climate: equipment should be sized for hard winter heating loads, and a cold-climate (NEEP-listed) heat pump is required to earn the top Rocky Mountain Power Wattsmart rebate.
Sources: Rocky Mountain Power - Savings & Energy Choices for Homes (Wattsmart) · SEER2 North Region efficiency standards · EIA Utah electricity profile
Not sure which rules and rebates apply to your home?
A licensed Grantsville pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Grantsville
Utah heating is mostly gas, which shapes the money back:
- StateUp to $2,000 (cold-climate/NEEP-listed unit)Rocky Mountain Power Wattsmart Homes - Heat Pump →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, though it is set to expire after 2025.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Grantsville, explained.
What Affects Furnace Repair Costs in Grantsville
Prices vary by the specific part needing replacement: flame sensor ($75–$225), igniter ($150–$425), blower motor ($375–$1,400), control board ($275–$750), or heat exchanger ($1,400–$3,300+). Labor rates reflect local costs, and a permit fee adds to the total. Emergency or after-hours service may increase the diagnostic fee. The age of your furnace and accessibility of components also influence the final price.
Common Furnace Repairs in Grantsville
Flame Sensor Failure
A dirty or faulty flame sensor can cause the furnace to shut off after ignition. Cleaning or replacing it costs $75–$225.
Igniter Problems
A cracked or worn igniter prevents the furnace from lighting. Replacement runs $150–$425.
Blower Motor Issues
A failing blower motor reduces airflow and heating efficiency. Repair or replacement costs $375–$1,400.
Furnace Repair FAQs — Grantsville
Yes, Utah requires a mechanical permit for most furnace repairs. Your contractor should handle the permit, which adds a small fee to the total cost.
Get a furnace repair quote.
No heat? Compare licensed local pros fast.