Furnace Repair in Kaysville
Get fast, fair pricing from licensed local pros. Typical Kaysville cost: $80 – $250 installed.
- Flame sensor
- $80 – $250
- Igniter
- $150 – $450
- Blower motor
- $400 – $1.5k
- Control board
- $300 – $800
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Kaysville repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair in Kaysville, Utah, typically costs between $80 and $3,500+, depending on the component. The median home was built in 1994, so many systems are 30+ years old and may require repairs to flame sensors, igniters, or blower motors. A diagnostic fee of $75–$200 applies. Utah requires a mechanical permit for furnace work, and local HVAC contractors must follow state codes. Kaysville's cold-dry high-desert climate means heating loads are significant, so proper sizing is critical. Most homes use gas furnaces, but high-efficiency heat pumps qualify for the Rocky Mountain Power Wattsmart rebate if NEEP-listed. The federal 25C tax credit (30%, up to $2,000 for qualifying heat pumps, up to $600 for high-efficiency AC) is available through 2025.
- Diagnostic / service callOften credited toward the repair$75 – $200
- Flame sensor or thermocoupleCommon no-heat cause on gas units$80 – $250
- Hot-surface igniterFurnace clicks but won’t light$150 – $450
- Blower motorNo airflow / weak airflow$400 – $1,500
- Heat exchangerCracked exchanger often means replace$1,500 – $3,500+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Kaysville
U.S. Census ACS- Households
- 13,086
- Homeowners
- 7,908
- 87% own
- Median home value
- $513,500
- Median income
- $121,867
- Median home built
- 1994
- Housing units
- 9,100
With a median home built in 1994, many Kaysville AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Kaysville?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Kaysville.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Kaysville
Given Utah’s cold-dry climate and gas heating, high-seer2 ac + gas furnace is the sensible default for most Kaysville homes. A pro can confirm the right size and system for your home with a load calculation.
Sources: Rocky Mountain Power - Savings & Energy Choices for Homes (Wattsmart) · SEER2 North Region efficiency standards · EIA Utah electricity profile
What Kaysville code requires
Installing or replacing an HVAC system in Kaysville follows Utah rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Cold-dry high-desert climate: equipment should be sized for hard winter heating loads, and a cold-climate (NEEP-listed) heat pump is required to earn the top Rocky Mountain Power Wattsmart rebate.
Sources: Rocky Mountain Power - Savings & Energy Choices for Homes (Wattsmart) · SEER2 North Region efficiency standards · EIA Utah electricity profile
Not sure which rules and rebates apply to your home?
A licensed Kaysville pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Kaysville
Utah heating is mostly gas, which shapes the money back:
- StateUp to $2,000 (cold-climate/NEEP-listed unit)Rocky Mountain Power Wattsmart Homes - Heat Pump →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, though it is set to expire after 2025.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Kaysville, explained.
What affects furnace repair costs in Kaysville?
Labor rates in Kaysville reflect the local median household income of $121,867, which is above the national average, so service calls may be slightly higher than in lower-income areas. The age of the home (median 1994) means older furnaces may need harder-to-find parts or more labor. Permit fees add $50–$150 to the job. The component itself drives the price: a flame sensor ($80–$250) is far less expensive than a heat exchanger ($1,500–$3,500+). Emergency or after-hours service increases the diagnostic fee. Finally, the choice between a basic repair and upgrading to a high-efficiency unit affects long-term costs.
Common furnace repairs in Kaysville
Flame sensor failure
A dirty or faulty flame sensor prevents the burner from staying lit. Repair cost: $80–$250.
Igniter problems
A cracked or worn igniter won't spark the gas. Replacement runs $150–$450.
Blower motor issues
A failing blower motor reduces airflow and heat output. Replacement costs $400–$1,500.
Furnace Repair FAQs — Kaysville
Yes, Utah requires a mechanical permit for any furnace repair that involves gas, electrical, or refrigerant work. Your contractor should pull the permit and include the fee in the quote.
Furnace Repair near Kaysville
Get a furnace repair quote.
No heat? Compare licensed local pros fast.