Furnace Repair in Camas
Get fast, fair pricing from licensed local pros. Typical Camas cost: $80 – $250 installed.
- Flame sensor
- $80 – $250
- Igniter
- $150 – $450
- Blower motor
- $400 – $1.5k
- Control board
- $300 – $800
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Camas repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair costs in Camas, Washington, typically range from $80 for a simple flame sensor replacement to over $3,500 for a heat exchanger, plus a $75–$200 diagnostic fee. With median home age around 27 years and a mild marine climate, most repairs involve gas or electric furnace components. Washington requires mechanical permits and Manual J load calculations for any furnace work, which can add to the total cost. Given the state's energy code favoring heat pumps, many Camas homeowners are considering heat pump replacements instead of repairing older furnaces.
- Diagnostic / service callOften credited toward the repair$75 – $200
- Flame sensor or thermocoupleCommon no-heat cause on gas units$80 – $250
- Hot-surface igniterFurnace clicks but won’t light$150 – $450
- Blower motorNo airflow / weak airflow$400 – $1,500
- Heat exchangerCracked exchanger often means replace$1,500 – $3,500+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Camas
U.S. Census ACS- Households
- 10,555
- Homeowners
- 7,124
- 77% own
- Median home value
- $603,000
- Median income
- $133,829
- Median home built
- 1999
- Housing units
- 9,307
With a median home built in 1999, many Camas AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Camas?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Camas.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Camas
Given Washington’s mild (marine, west of cascades) climate and electric heating, high-seer2 heat pump is the sensible default for most Camas homes. The cooling season is short, so the budget is better spent on heating efficiency than on ultra-high SEER2. A pro can confirm the right size and system for your home with a load calculation.
Sources: PSE Home Heating Rebates · WA Dept. of Commerce HEAR Program · 2021 Washington State Energy Code - Residential (WAC 51-11R)
What Camas code requires
Installing or replacing an HVAC system in Camas follows Washington rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRequired (Manual J)
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
The Washington State Energy Code (WSEC-R) requires ACCA Manual J load calcs and Manual S equipment sizing at permit, and recent code strongly favors/effectively requires heat pumps for space heating in new residential construction.
Sources: PSE Home Heating Rebates · WA Dept. of Commerce HEAR Program · 2021 Washington State Energy Code - Residential (WAC 51-11R)
Not sure which rules and rebates apply to your home?
A licensed Camas pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Camas
Washington heating is mostly electric, which shapes the money back:
- State$1,500 (up to $2,400 income-qualified Efficiency Boost)Puget Sound Energy - Electric resistance to air-source heat pump conversion rebate →
State or utility program — verify eligibility before you buy.
- StateUp to $8,000 for heat pumps (income-qualified)Washington Dept. of Commerce - Home Electrification and Appliance Rebates (HEAR) →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Washington.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Camas, explained.
What affects furnace repair cost in Camas?
Labor rates reflect the local median income of $133,829, and permit fees in Washington add $50–$150. The mild climate means less wear on cooling systems, but furnace repairs are common due to the 27-year median home age. The shift toward heat pumps (driven by WSEC-R) may make repairs less economical for older units. Part availability and the need for Manual J load calculations also influence pricing.
Common furnace issues in Camas
Flame sensor failure
A dirty or faulty flame sensor is a frequent issue in Camas homes, causing the furnace to short-cycle. Repair costs $80–$250.
Igniter problems
The igniter may wear out after 10–15 years, especially in older furnaces. Replacement runs $150–$450.
Blower motor malfunction
Blower motors can fail due to age or debris, leading to poor airflow. Repair costs $400–$1,500.
Furnace Repair FAQs — Camas
Yes, Washington requires a mechanical permit for most furnace repairs, including component replacements. Your contractor should handle the permit and any required Manual J load calculations.
Get a furnace repair quote.
No heat? Compare licensed local pros fast.