Furnace Repair in Edmonds
Get fast, fair pricing from licensed local pros. Typical Edmonds cost: $80 – $250 installed.
- Flame sensor
- $80 – $250
- Igniter
- $150 – $450
- Blower motor
- $400 – $1.5k
- Control board
- $300 – $800
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Edmonds repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair costs in Edmonds, WA, typically range from $80 for a simple flame sensor replacement to $3,500+ for a heat exchanger, plus a $75–$200 diagnostic fee. With a median home age of 53 years, many systems are nearing or past their expected lifespan. Washington's energy code (WSEC-R) requires permits and Manual J load calculations for any repair that alters the system, which can add to labor costs. Given the mild marine climate and low cooling demand, heat pumps are the recommended system type, and many homeowners are transitioning away from furnaces. Local labor rates reflect the area's high median income of $110,057, so expect professional service to be priced accordingly.
- Diagnostic / service callOften credited toward the repair$75 – $200
- Flame sensor or thermocoupleCommon no-heat cause on gas units$80 – $250
- Hot-surface igniterFurnace clicks but won’t light$150 – $450
- Blower motorNo airflow / weak airflow$400 – $1,500
- Heat exchangerCracked exchanger often means replace$1,500 – $3,500+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Edmonds
U.S. Census ACS- Households
- 17,082
- Homeowners
- 12,728
- 66% own
- Median home value
- $761,300
- Median income
- $110,057
- Median home built
- 1973
- Housing units
- 19,205
With a median home built in 1973, many Edmonds AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Edmonds?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Edmonds.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Edmonds
Given Washington’s mild (marine, west of cascades) climate and electric heating, high-seer2 heat pump is the sensible default for most Edmonds homes. The cooling season is short, so the budget is better spent on heating efficiency than on ultra-high SEER2. A pro can confirm the right size and system for your home with a load calculation.
Sources: PSE Home Heating Rebates · WA Dept. of Commerce HEAR Program · 2021 Washington State Energy Code - Residential (WAC 51-11R)
What Edmonds code requires
Installing or replacing an HVAC system in Edmonds follows Washington rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRequired (Manual J)
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
The Washington State Energy Code (WSEC-R) requires ACCA Manual J load calcs and Manual S equipment sizing at permit, and recent code strongly favors/effectively requires heat pumps for space heating in new residential construction.
Sources: PSE Home Heating Rebates · WA Dept. of Commerce HEAR Program · 2021 Washington State Energy Code - Residential (WAC 51-11R)
Not sure which rules and rebates apply to your home?
A licensed Edmonds pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Edmonds
Washington heating is mostly electric, which shapes the money back:
- State$1,500 (up to $2,400 income-qualified Efficiency Boost)Puget Sound Energy - Electric resistance to air-source heat pump conversion rebate →
State or utility program — verify eligibility before you buy.
- StateUp to $8,000 for heat pumps (income-qualified)Washington Dept. of Commerce - Home Electrification and Appliance Rebates (HEAR) →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Washington.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Edmonds, explained.
Why furnace repair costs vary in Edmonds
The age of your home (median built 1973) often means older ductwork or electrical systems that complicate repairs. The specific component—flame sensor ($80–$250) vs. blower motor ($400–$1,500)—drives the base price. Washington's permit requirement (typically $50–$150) and mandatory Manual J load calculation add overhead. If a repair triggers the need for a heat pump conversion under WSEC-R, costs rise significantly. Labor rates reflect the local economy, and emergency after-hours calls command a premium.
Common furnace repairs in Edmonds homes
Flame sensor failure
A dirty or faulty flame sensor is a frequent issue in older furnaces, causing the system to shut off after ignition. Cleaning or replacement costs $80–$250.
Igniter problems
A cracked or worn igniter prevents the furnace from lighting. Replacement runs $150–$450, common in units over 10 years old.
Blower motor malfunction
Blower motor failure leads to no heat or poor airflow. Repair costs $400–$1,500, often due to age or debris buildup in the motor.
Furnace Repair FAQs — Edmonds
Yes, Washington requires a mechanical permit for any repair that alters the system, such as replacing a heat exchanger or blower motor. Simple sensor swaps may not need one, but your contractor should advise.
Get a furnace repair quote.
No heat? Compare licensed local pros fast.