AC Repair in Kenmore
Get fast, fair pricing from licensed local pros. Typical Kenmore cost: $150 – $375 installed.
- Capacitor / contactor
- $150 – $375
- Refrigerant recharge
- $225 – $700
- Fan / blower motor
- $325 – $850
- Compressor
- $1.1k – $2.6k+
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
AC repair cost by part.
Typical Kenmore repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
AC repair costs in Kenmore, Washington, typically range from $150 for a capacitor replacement to over $2,600 for a compressor, plus a $70–$175 diagnostic fee. With a median home age of 43 years and mild marine climate, common repairs involve aging components like fan motors or refrigerant leaks. Washington requires a mechanical permit for most AC repairs, and the state energy code (WSEC-R) mandates Manual J load calculations and Manual S equipment sizing. For most Kenmore homes, a heat pump is recommended over a standard AC due to the region's mild winters and electric heating prevalence, and it qualifies for the federal 25C tax credit (30%, up to $2,000).
- Diagnostic / service callOften credited toward the repair$70 – $175
- Capacitor or contactorMost common no-cooling cause$150 – $375
- Refrigerant rechargeLeak search adds to the cost$225 – $700+
- Fan or blower motorCondenser or air-handler motor$325 – $850
- Compressor replacementOften near replace-the-system territory$1,100 – $2,600+
* If the system is over ~12 years old or the compressor fails, weigh repair against replacement.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Kenmore
U.S. Census ACS- Households
- 9,444
- Homeowners
- 6,335
- 66% own
- Median home value
- $803,000
- Median income
- $132,191
- Median home built
- 1983
- Housing units
- 9,575
With a median home built in 1983, many Kenmore AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Kenmore?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Kenmore.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Kenmore
Given Washington’s mild (marine, west of cascades) climate and electric heating, high-seer2 heat pump is the sensible default for most Kenmore homes. The cooling season is short, so the budget is better spent on heating efficiency than on ultra-high SEER2. A pro can confirm the right size and system for your home with a load calculation.
Sources: PSE Home Heating Rebates · WA Dept. of Commerce HEAR Program · 2021 Washington State Energy Code - Residential (WAC 51-11R)
What Kenmore code requires
Installing or replacing an HVAC system in Kenmore follows Washington rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRequired (Manual J)
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
The Washington State Energy Code (WSEC-R) requires ACCA Manual J load calcs and Manual S equipment sizing at permit, and recent code strongly favors/effectively requires heat pumps for space heating in new residential construction.
Sources: PSE Home Heating Rebates · WA Dept. of Commerce HEAR Program · 2021 Washington State Energy Code - Residential (WAC 51-11R)
Not sure which rules and rebates apply to your home?
A licensed Kenmore pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Kenmore
Washington heating is mostly electric, which shapes the money back:
- State$1,500 (up to $2,400 income-qualified Efficiency Boost)Puget Sound Energy - Electric resistance to air-source heat pump conversion rebate →
State or utility program — verify eligibility before you buy.
- StateUp to $8,000 for heat pumps (income-qualified)Washington Dept. of Commerce - Home Electrification and Appliance Rebates (HEAR) →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Washington.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
AC Repair in Kenmore, explained.
Why AC Repair Costs Vary in Kenmore
Costs depend on the specific part needed—capacitors and contactors ($150–$375) are more affordable than compressors ($1,100–$2,600+). Labor rates reflect local overhead and the need for a Washington mechanical permit, which adds $70–$175 for the diagnostic. Older homes (built around 1983) may have outdated refrigerant (R-410A), now phased down, requiring more expensive R-454B or R-32. Heat pump repairs can be more complex than standard AC, but the mild climate reduces overall cooling demand, keeping some costs lower.
Common AC Repair Issues in Kenmore
Capacitor or Contactor Failure
Aged capacitors or contactors often fail in Kenmore's mild climate, causing the AC unit to not start or run intermittently. Replacement costs $150–$375.
Refrigerant Leaks
Leaks in older systems using R-410A are common; recharge costs $225–$700+. Newer systems use R-454B or R-32, which may be more expensive to service.
Fan or Blower Motor Problems
Motors wear out in 43-year-old homes, leading to poor airflow or no cooling. Repair or replacement runs $325–$850.
AC Repair FAQs — Kenmore
Yes, Washington requires a mechanical permit for most AC repairs, including compressor replacement or refrigerant work. Your contractor should handle the permit and ensure compliance with WSEC-R.
Get an AC repair quote.
No cool air? Compare licensed local pros fast.