Furnace Repair in Seattle
Get fast, fair pricing from licensed local pros. Typical Seattle cost: $100 – $300 installed.
- Flame sensor
- $100 – $300
- Igniter
- $175 – $550
- Blower motor
- $500 – $1.9k
- Control board
- $375 – $1k
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Seattle repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
In Seattle, furnace repair costs vary based on the age of your home and the specific component needing service. With a median home built in 1973, many Seattle homes have older systems that may require more frequent repairs. Typical repair prices include flame sensor replacement ($100–$300), igniter replacement ($175–$550), blower motor replacement ($500–$1,850), control board replacement ($375–$1,000), and heat exchanger replacement ($1,850–$4,300+), plus a diagnostic fee of $90–$250. Washington State requires a mechanical permit for most furnace repairs, and the Washington State Energy Code (WSEC-R) mandates ACCA Manual J load calculations and Manual S equipment sizing. Given the mild marine climate and the state's push toward heat pumps, many homeowners consider heat pump systems as a long-term alternative to traditional furnace repairs.
- Diagnostic / service callOften credited toward the repair$90 – $250
- Flame sensor or thermocoupleCommon no-heat cause on gas units$100 – $300
- Hot-surface igniterFurnace clicks but won’t light$175 – $550
- Blower motorNo airflow / weak airflow$500 – $1,850
- Heat exchangerCracked exchanger often means replace$1,850 – $4,300+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Seattle
U.S. Census ACS- Households
- 293,841
- Homeowners
- 153,477
- 41% own
- Median home value
- $879,900
- Median income
- $116,068
- Median home built
- 1973
- Housing units
- 372,436
With a median home built in 1973, many Seattle AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Seattle?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Seattle.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Seattle
Given Washington’s mild (marine, west of cascades) climate and electric heating, high-seer2 heat pump is the sensible default for most Seattle homes. The cooling season is short, so the budget is better spent on heating efficiency than on ultra-high SEER2. A pro can confirm the right size and system for your home with a load calculation.
Sources: PSE Home Heating Rebates · WA Dept. of Commerce HEAR Program · 2021 Washington State Energy Code - Residential (WAC 51-11R)
What Seattle code requires
Installing or replacing an HVAC system in Seattle follows Washington rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRequired (Manual J)
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
The Washington State Energy Code (WSEC-R) requires ACCA Manual J load calcs and Manual S equipment sizing at permit, and recent code strongly favors/effectively requires heat pumps for space heating in new residential construction.
Sources: PSE Home Heating Rebates · WA Dept. of Commerce HEAR Program · 2021 Washington State Energy Code - Residential (WAC 51-11R)
Not sure which rules and rebates apply to your home?
A licensed Seattle pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Seattle
Washington heating is mostly electric, which shapes the money back:
- State$1,500 (up to $2,400 income-qualified Efficiency Boost)Puget Sound Energy - Electric resistance to air-source heat pump conversion rebate →
State or utility program — verify eligibility before you buy.
- StateUp to $8,000 for heat pumps (income-qualified)Washington Dept. of Commerce - Home Electrification and Appliance Rebates (HEAR) →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Washington.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Seattle, explained.
Why Furnace Repair Costs Vary in Seattle
Repair costs in Seattle depend on the specific component, labor rates, and whether a permit is required. Older homes (median built 1973) often have harder-to-find parts or require more labor. The mild climate means heating demand is moderate, but the state's energy code favors heat pumps, which can influence repair vs. replacement decisions. Permit fees and the need for a Manual J load calculation add to the cost for any work requiring a permit.
Common Furnace Repair Issues in Seattle
Igniter Failure
The igniter is a common wear item, especially in older furnaces. Replacement typically costs $175–$550.
Blower Motor Problems
Blower motors can fail due to age or debris. Replacement ranges from $500 to $1,850.
Flame Sensor Malfunction
A dirty or faulty flame sensor can cause the furnace to cycle on and off. Cleaning or replacement costs $100–$300.
What to Expect During a Furnace Repair in Seattle
A technician will first diagnose the issue, charging a $90–$250 diagnostic fee. If a repair is needed, they will provide an upfront estimate. For work requiring a permit, the technician will handle the permit application and schedule an inspection. Given the mild climate, repairs are often straightforward, but older homes may present challenges with access or part availability.
Furnace Repair FAQs — Seattle
Yes, Washington State requires a mechanical permit for most furnace repairs, especially those involving gas lines or major component replacement. Your contractor should obtain the permit and schedule the required inspection.
Get a furnace repair quote.
No heat? Compare licensed local pros fast.