Furnace Repair in De Pere
Get fast, fair pricing from licensed local pros. Typical De Pere cost: $75 – $250 installed.
- Flame sensor
- $75 – $250
- Igniter
- $150 – $425
- Blower motor
- $375 – $1.4k
- Control board
- $275 – $750
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical De Pere repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
In De Pere, Wisconsin, furnace repair costs typically range from $75 for a simple flame sensor replacement to over $3,300 for a heat exchanger, plus a $70–$200 diagnostic fee. With a median home age of 42 years and cold winters, older furnaces often need repairs. Wisconsin requires a mechanical permit and a licensed DSPS contractor for any furnace work, including like-for-like replacements. Most homes use gas furnaces, and the federal 25C tax credit (30%, up to $600 for high-efficiency central AC) applies here. For severe winter design temps, proper sizing is critical.
- Diagnostic / service callOften credited toward the repair$70 – $200
- Flame sensor or thermocoupleCommon no-heat cause on gas units$75 – $250
- Hot-surface igniterFurnace clicks but won’t light$150 – $425
- Blower motorNo airflow / weak airflow$375 – $1,450
- Heat exchangerCracked exchanger often means replace$1,450 – $3,300+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in De Pere
U.S. Census ACS- Households
- 10,149
- Homeowners
- 6,542
- 62% own
- Median home value
- $232,000
- Median income
- $78,733
- Median home built
- 1984
- Housing units
- 10,519
With a median home built in 1984, many De Pere AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in De Pere?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about De Pere.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for De Pere
Given Wisconsin’s cold climate and gas heating, high-seer2 ac + gas furnace is the sensible default for most De Pere homes. The cooling season is short, so the budget is better spent on heating efficiency than on ultra-high SEER2. A pro can confirm the right size and system for your home with a load calculation.
Sources: Focus on Energy - Residential Heating & Cooling · Wisconsin DSPS HVAC Contractor / mechanical permitting · EIA Wisconsin Electricity Profile
What De Pere code requires
Installing or replacing an HVAC system in De Pere follows Wisconsin rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Cold-climate state: equipment must be sized for severe winter design temps; mechanical permit and a licensed Wisconsin HVAC contractor (DSPS) required even for like-for-like changeouts.
Sources: Focus on Energy - Residential Heating & Cooling · Wisconsin DSPS HVAC Contractor / mechanical permitting · EIA Wisconsin Electricity Profile
Not sure which rules and rebates apply to your home?
A licensed De Pere pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in De Pere
Wisconsin heating is mostly gas, which shapes the money back:
- State$400-$900 instant rebateFocus on Energy - Residential Air-Source Heat Pump Rebate →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Wisconsin.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in De Pere, explained.
What Affects Furnace Repair Costs in De Pere?
Repair costs in De Pere depend on the part needed—flame sensors ($75–$250) are more affordable than blower motors ($375–$1,450) or heat exchangers ($1,450–$3,300+). Labor rates reflect the need for a licensed Wisconsin contractor, and permit fees add to the total. The age of your furnace (median 42 years) may increase repair complexity. Emergency or after-hours service can also raise the price.
Common Furnace Repairs in De Pere
Flame Sensor Failure
A dirty or faulty flame sensor causes the furnace to cycle on and off. Replacement costs $75–$250.
Igniter Problems
A broken igniter prevents ignition. Typical repair runs $150–$425.
Blower Motor Malfunction
A failing blower motor reduces airflow. Replacement costs $375–$1,450.
Furnace Repair FAQs — De Pere
Yes, Wisconsin requires a mechanical permit for any furnace repair or replacement. A licensed DSPS contractor must pull the permit and perform the work.
Furnace Repair near De Pere
Get a furnace repair quote.
No heat? Compare licensed local pros fast.