Furnace Repair in Holmen
Get fast, fair pricing from licensed local pros. Typical Holmen cost: $70 – $225 installed.
- Flame sensor
- $70 – $225
- Igniter
- $125 – $400
- Blower motor
- $350 – $1.3k
- Control board
- $275 – $700
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Holmen repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair costs in Holmen, Wisconsin typically range from $65 for a diagnostic fee to over $3,100 for a heat exchanger replacement. Most homes were built around 1999, so many furnaces are nearing 27 years old and may need common repairs like flame sensor or igniter replacement. Holmen's cold climate means furnaces must be sized for severe winter design temperatures, and all repairs require a mechanical permit from the Wisconsin Department of Safety and Professional Services (DSPS). A licensed HVAC contractor must perform the work, even for like-for-like replacements. Most homes use gas heating, and a gas furnace paired with a central AC is the recommended system type.
- Diagnostic / service callOften credited toward the repair$65 – $175
- Flame sensor or thermocoupleCommon no-heat cause on gas units$70 – $225
- Hot-surface igniterFurnace clicks but won’t light$125 – $400
- Blower motorNo airflow / weak airflow$350 – $1,300
- Heat exchangerCracked exchanger often means replace$1,300 – $3,100+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Holmen
U.S. Census ACS- Households
- 4,322
- Homeowners
- 2,830
- 64% own
- Median home value
- $258,000
- Median income
- $77,880
- Median home built
- 1999
- Housing units
- 4,431
With a median home built in 1999, many Holmen AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Holmen?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Holmen.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Holmen
Given Wisconsin’s cold climate and gas heating, high-seer2 ac + gas furnace is the sensible default for most Holmen homes. The cooling season is short, so the budget is better spent on heating efficiency than on ultra-high SEER2. A pro can confirm the right size and system for your home with a load calculation.
Sources: Focus on Energy - Residential Heating & Cooling · Wisconsin DSPS HVAC Contractor / mechanical permitting · EIA Wisconsin Electricity Profile
What Holmen code requires
Installing or replacing an HVAC system in Holmen follows Wisconsin rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Cold-climate state: equipment must be sized for severe winter design temps; mechanical permit and a licensed Wisconsin HVAC contractor (DSPS) required even for like-for-like changeouts.
Sources: Focus on Energy - Residential Heating & Cooling · Wisconsin DSPS HVAC Contractor / mechanical permitting · EIA Wisconsin Electricity Profile
Not sure which rules and rebates apply to your home?
A licensed Holmen pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Holmen
Wisconsin heating is mostly gas, which shapes the money back:
- State$400-$900 instant rebateFocus on Energy - Residential Air-Source Heat Pump Rebate →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Wisconsin.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Holmen, explained.
What drives furnace repair costs in Holmen?
Costs vary based on the specific part needed and labor time. For example, a flame sensor repair ($70–$225) is more affordable than a blower motor ($350–$1,300) or control board ($275–$700). Heat exchanger replacements are the most expensive ($1,300–$3,100+) due to labor and permit requirements. The diagnostic fee ($65–$175) covers the technician's visit. Wisconsin's cold climate means repairs are often urgent in winter, but prices remain consistent with local market rates.
Common furnace repairs in Holmen
Flame sensor failure
A dirty or faulty flame sensor is a frequent cause of short cycling. Cleaning or replacement costs $70–$225.
Igniter problems
A worn igniter prevents the furnace from lighting. Replacement typically runs $125–$400.
Blower motor issues
The blower motor can fail due to age or overheating. Repair or replacement costs $350–$1,300.
Furnace Repair FAQs — Holmen
Yes, Wisconsin requires a mechanical permit for most furnace repairs, including like-for-like replacements. A licensed DSPS contractor must pull the permit and perform the work.
Furnace Repair near Holmen
Get a furnace repair quote.
No heat? Compare licensed local pros fast.