Furnace Repair in Menomonie
Get fast, fair pricing from licensed local pros. Typical Menomonie cost: $65 – $200 installed.
- Flame sensor
- $65 – $200
- Igniter
- $125 – $350
- Blower motor
- $325 – $1.1k
- Control board
- $225 – $650
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Menomonie repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair costs in Menomonie, Wisconsin, vary based on the age of your system and the specific issue. With a median home built in 1979, many furnaces are nearing or past their expected lifespan. A typical diagnostic fee runs $60–$150, and common repairs like a flame sensor cost $65–$200, while a blower motor replacement can run $325–$1,150. Wisconsin requires a mechanical permit and a licensed DSPS contractor for any furnace work, including like-for-like replacements. Given the cold climate, proper sizing for severe winter design temperatures is critical. Most homes use gas heating, and a gas furnace with central AC is a recommended system type.
- Diagnostic / service callOften credited toward the repair$60 – $150
- Flame sensor or thermocoupleCommon no-heat cause on gas units$65 – $200
- Hot-surface igniterFurnace clicks but won’t light$125 – $350
- Blower motorNo airflow / weak airflow$325 – $1,150
- Heat exchangerCracked exchanger often means replace$1,150 – $2,700+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Menomonie
U.S. Census ACS- Households
- 6,625
- Homeowners
- 2,368
- 36% own
- Median home value
- $187,200
- Median income
- $51,250
- Median home built
- 1979
- Housing units
- 6,506
With a median home built in 1979, many Menomonie AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Menomonie?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Menomonie.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Menomonie
Given Wisconsin’s cold climate and gas heating, high-seer2 ac + gas furnace is the sensible default for most Menomonie homes. The cooling season is short, so the budget is better spent on heating efficiency than on ultra-high SEER2. A pro can confirm the right size and system for your home with a load calculation.
Sources: Focus on Energy - Residential Heating & Cooling · Wisconsin DSPS HVAC Contractor / mechanical permitting · EIA Wisconsin Electricity Profile
What Menomonie code requires
Installing or replacing an HVAC system in Menomonie follows Wisconsin rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Cold-climate state: equipment must be sized for severe winter design temps; mechanical permit and a licensed Wisconsin HVAC contractor (DSPS) required even for like-for-like changeouts.
Sources: Focus on Energy - Residential Heating & Cooling · Wisconsin DSPS HVAC Contractor / mechanical permitting · EIA Wisconsin Electricity Profile
Not sure which rules and rebates apply to your home?
A licensed Menomonie pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Menomonie
Wisconsin heating is mostly gas, which shapes the money back:
- State$400-$900 instant rebateFocus on Energy - Residential Air-Source Heat Pump Rebate →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Wisconsin.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Menomonie, explained.
What Affects Furnace Repair Costs in Menomonie
Repair costs depend on the part needed and labor time. For example, a flame sensor is a quick, low-cost fix, while a heat exchanger replacement can exceed $2,700 due to labor and permit requirements. The age of your furnace (median home built 1979) may mean harder-to-find parts. Wisconsin’s permit and licensed contractor requirements add to overhead. The cold climate means repairs often happen during peak demand, which can influence scheduling and pricing.
Common Furnace Repairs in Menomonie
Flame Sensor Failure
A dirty or faulty flame sensor prevents the furnace from staying lit. Repair cost: $65–$200.
Igniter Problems
A cracked or worn igniter stops the furnace from starting. Typical repair: $125–$350.
Blower Motor Issues
A failing blower motor reduces airflow and heating efficiency. Replacement runs $325–$1,150.
Furnace Repair FAQs — Menomonie
Yes, Wisconsin requires a mechanical permit for any furnace repair or replacement, even for like-for-like changeouts. A licensed DSPS contractor must perform the work.
Get a furnace repair quote.
No heat? Compare licensed local pros fast.