Furnace Repair in Neenah
Get fast, fair pricing from licensed local pros. Typical Neenah cost: $75 – $225 installed.
- Flame sensor
- $75 – $225
- Igniter
- $150 – $425
- Blower motor
- $375 – $1.4k
- Control board
- $275 – $750
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Neenah repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
In Neenah, Wisconsin, furnace repair costs vary based on the age of your home and the specific issue. With a median home built in 1968, many furnaces are older and may require more frequent repairs. Common repairs include flame sensors ($75–$225), igniters ($150–$425), and blower motors ($375–$1,400). A diagnostic fee of $70–$175 typically applies. Wisconsin requires a mechanical permit for furnace work, and a licensed DSPS contractor must perform the repair. Most Neenah homes use gas heating, and given the cold climate, prompt repair is critical.
- Diagnostic / service callOften credited toward the repair$70 – $175
- Flame sensor or thermocoupleCommon no-heat cause on gas units$75 – $225
- Hot-surface igniterFurnace clicks but won’t light$150 – $425
- Blower motorNo airflow / weak airflow$375 – $1,400
- Heat exchangerCracked exchanger often means replace$1,400 – $3,200+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Neenah
U.S. Census ACS- Households
- 10,924
- Homeowners
- 7,306
- 63% own
- Median home value
- $175,000
- Median income
- $71,280
- Median home built
- 1968
- Housing units
- 11,672
With a median home built in 1968, many Neenah AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Neenah?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Neenah.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Neenah
Given Wisconsin’s cold climate and gas heating, high-seer2 ac + gas furnace is the sensible default for most Neenah homes. The cooling season is short, so the budget is better spent on heating efficiency than on ultra-high SEER2. A pro can confirm the right size and system for your home with a load calculation.
Sources: Focus on Energy - Residential Heating & Cooling · Wisconsin DSPS HVAC Contractor / mechanical permitting · EIA Wisconsin Electricity Profile
What Neenah code requires
Installing or replacing an HVAC system in Neenah follows Wisconsin rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Cold-climate state: equipment must be sized for severe winter design temps; mechanical permit and a licensed Wisconsin HVAC contractor (DSPS) required even for like-for-like changeouts.
Sources: Focus on Energy - Residential Heating & Cooling · Wisconsin DSPS HVAC Contractor / mechanical permitting · EIA Wisconsin Electricity Profile
Not sure which rules and rebates apply to your home?
A licensed Neenah pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Neenah
Wisconsin heating is mostly gas, which shapes the money back:
- State$400-$900 instant rebateFocus on Energy - Residential Air-Source Heat Pump Rebate →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Wisconsin.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Neenah, explained.
What affects furnace repair costs in Neenah?
Repair costs in Neenah depend on the part needed and labor. Older homes (median built 1968) may have harder-to-find parts or require more labor. The severity of winter design temperatures means equipment must be properly sized, which can affect repair complexity. Permit fees and the need for a licensed Wisconsin contractor also add to the cost. The federal 25C tax credit does not apply to repairs, only to qualifying new equipment.
Common furnace repairs in Neenah
Flame sensor failure
A dirty or faulty flame sensor can cause the furnace to cycle on and off. Repair typically costs $75–$225.
Igniter problems
A cracked or worn igniter prevents the furnace from lighting. Replacement runs $150–$425.
Blower motor issues
A failing blower motor reduces airflow and heating efficiency. Repair costs $375–$1,400.
Furnace Repair FAQs — Neenah
Yes, Wisconsin requires a mechanical permit for most furnace repairs, including like-for-like replacements. A licensed DSPS contractor must handle the work.
Get a furnace repair quote.
No heat? Compare licensed local pros fast.