Furnace Repair in Commerce City
Get fast, fair pricing from licensed local pros. Typical Commerce City cost: $90 – $275 installed.
- Flame sensor
- $90 – $275
- Igniter
- $175 – $500
- Blower motor
- $450 – $1.6k
- Control board
- $325 – $900
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Commerce City repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair in Commerce City typically ranges from $85–$225 for a diagnostic fee, plus parts and labor. With a median home age of 22 years, common repairs include flame sensors ($90–$275), igniters ($175–$500), and blower motors ($450–$1,650). Colorado requires a mechanical permit for most furnace repairs, and cold-climate sizing is critical due to sub-zero winters at altitude. Many homes use gas heating, but dual-fuel systems with a heat pump and gas backup are recommended for efficiency and rebate eligibility.
- Diagnostic / service callOften credited toward the repair$85 – $225
- Flame sensor or thermocoupleCommon no-heat cause on gas units$90 – $275
- Hot-surface igniterFurnace clicks but won’t light$175 – $500
- Blower motorNo airflow / weak airflow$450 – $1,650
- Heat exchangerCracked exchanger often means replace$1,650 – $3,900+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Commerce City
U.S. Census ACS- Households
- 25,220
- Homeowners
- 15,854
- 74% own
- Median home value
- $436,500
- Median income
- $96,484
- Median home built
- 2004
- Housing units
- 21,392
With a median home built in 2004, many Commerce City AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Commerce City?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Commerce City.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Commerce City
Given Colorado’s cold semi-arid (cold-dry) climate and gas heating, dual-fuel (cold-climate heat pump + gas furnace) is the sensible default for most Commerce City homes. A pro can confirm the right size and system for your home with a load calculation.
Sources: Colorado Energy Office - Heat Pump Tax Credit · Xcel Energy Colorado - Heat Pumps & Rebates · EIA - Colorado electricity data
What Commerce City code requires
Installing or replacing an HVAC system in Commerce City follows Colorado rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Cold-climate sizing matters: at altitude with sub-zero winters, heat pumps need a low-temp (5F) rating or gas backup; high-altitude mountain towns and Xcel offer enhanced cold-climate heat pump rebates.
Sources: Colorado Energy Office - Heat Pump Tax Credit · Xcel Energy Colorado - Heat Pumps & Rebates · EIA - Colorado electricity data
Not sure which rules and rebates apply to your home?
A licensed Commerce City pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Commerce City
Colorado heating is mostly gas, which shapes the money back:
- State$1,000 upfront rebate in 2026 via registered contractorColorado Heat Pump Tax Credit (Colorado Energy Office) →
State or utility program — verify eligibility before you buy.
- StateUp to ~$2,250 per heating ton (5F) for cold-climate air-source heat pumpsXcel Energy Colorado Heat Pump Rebates →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Colorado.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Commerce City, explained.
What affects repair costs in Commerce City?
Labor rates reflect local demand and the need for licensed technicians. Part costs vary by brand and availability. Permits add $50–$150. Older furnaces (pre-2004) may need more extensive repairs like heat exchangers ($1,650–$3,900+). Altitude affects combustion efficiency, so adjustments may be needed. Federal tax credits (25C) can offset costs for qualifying high-efficiency equipment, but not for repairs.
Common furnace repairs in Commerce City
Flame sensor failure
A dirty or faulty flame sensor causes the furnace to cycle on and off. Repair costs $90–$275.
Igniter malfunction
A broken igniter prevents the furnace from lighting. Replacement runs $175–$500.
Blower motor issues
A failing blower motor reduces airflow. Repair or replacement costs $450–$1,650.
What to expect during a furnace repair
A technician will diagnose the issue (diagnostic fee $85–$225), provide an upfront cost estimate, and obtain any required permits. Repairs typically take 1–3 hours. For major components like a heat exchanger, the job may require multiple visits. Always ask for a permit if required by code.
Furnace Repair FAQs — Commerce City
Yes, Colorado requires a mechanical permit for most furnace repairs, especially those involving gas lines or major components. Your contractor should handle the permit.
Furnace Repair near Commerce City
Get a furnace repair quote.
No heat? Compare licensed local pros fast.