Furnace Repair in Denver
Get fast, fair pricing from licensed local pros. Typical Denver cost: $95 – $300 installed.
- Flame sensor
- $95 – $300
- Igniter
- $175 – $550
- Blower motor
- $475 – $1.8k
- Control board
- $350 – $950
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Denver repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
In Denver, furnace repair costs vary widely depending on the component and labor. Typical prices include flame sensor repair ($95–$300), igniter replacement ($175–$550), blower motor ($475–$1,800), control board ($350–$950), and heat exchanger ($1,800–$4,200+), plus a diagnostic fee of $90–$250. Because most homes were built around 1972, older systems may require more extensive repairs or upgrades to meet current Colorado mechanical permit requirements and SEER2 minimums. Denver's cold semi-arid climate with sub-zero winters means proper sizing and cold-climate performance are critical, especially for heat pumps, which may need a low-temperature rating or gas backup. Dual-fuel systems are often recommended for efficiency and reliability.
- Diagnostic / service callOften credited toward the repair$90 – $250
- Flame sensor or thermocoupleCommon no-heat cause on gas units$95 – $300
- Hot-surface igniterFurnace clicks but won’t light$175 – $550
- Blower motorNo airflow / weak airflow$475 – $1,800
- Heat exchangerCracked exchanger often means replace$1,800 – $4,200+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Denver
U.S. Census ACS- Households
- 284,320
- Homeowners
- 159,483
- 46% own
- Median home value
- $540,400
- Median income
- $85,853
- Median home built
- 1972
- Housing units
- 344,760
With a median home built in 1972, many Denver AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Denver?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Denver.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Denver
Given Colorado’s cold semi-arid (cold-dry) climate and gas heating, dual-fuel (cold-climate heat pump + gas furnace) is the sensible default for most Denver homes. A pro can confirm the right size and system for your home with a load calculation.
Sources: Colorado Energy Office - Heat Pump Tax Credit · Xcel Energy Colorado - Heat Pumps & Rebates · EIA - Colorado electricity data
What Denver code requires
Installing or replacing an HVAC system in Denver follows Colorado rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Cold-climate sizing matters: at altitude with sub-zero winters, heat pumps need a low-temp (5F) rating or gas backup; high-altitude mountain towns and Xcel offer enhanced cold-climate heat pump rebates.
Sources: Colorado Energy Office - Heat Pump Tax Credit · Xcel Energy Colorado - Heat Pumps & Rebates · EIA - Colorado electricity data
Not sure which rules and rebates apply to your home?
A licensed Denver pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Denver
Colorado heating is mostly gas, which shapes the money back:
- State$1,000 upfront rebate in 2026 via registered contractorColorado Heat Pump Tax Credit (Colorado Energy Office) →
State or utility program — verify eligibility before you buy.
- StateUp to ~$2,250 per heating ton (5F) for cold-climate air-source heat pumpsXcel Energy Colorado Heat Pump Rebates →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Colorado.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Denver, explained.
Why Repair Costs Vary in Denver
Denver's altitude and cold winters affect system performance and repair complexity. Older homes (median built 1972) often have outdated equipment that may need additional labor or parts sourcing. The cost of a mechanical permit and compliance with Colorado's SEER2 minimum (13.4 SEER2 North) can add to the total. Labor rates reflect the local cost of living (median income $85,853) and the need for technicians trained in high-altitude, cold-climate repairs. Parts availability and the extent of the repair (e.g., simple sensor vs. heat exchanger) also drive price differences.
Common Furnace Repairs in Denver
Flame sensor failure
A dirty or faulty flame sensor can cause the furnace to cycle on and off. Cleaning or replacement is a common, relatively low-cost fix.
Igniter problems
A cracked or worn igniter prevents the burner from lighting. Replacement typically costs $175–$550.
Blower motor issues
The blower motor may fail due to age or overheating, leading to poor airflow. Replacement ranges from $475 to $1,800.
What to Expect During a Furnace Repair in Denver
A technician will first perform a diagnostic check ($90–$250) to identify the issue. They will then provide an upfront cost estimate for the repair, which may require a mechanical permit from the city. For older systems, they may recommend upgrades to meet current efficiency standards. Repairs typically take a few hours, but complex jobs like heat exchanger replacement may take a full day.
Furnace Repair FAQs — Denver
Yes, Colorado requires a mechanical permit for most furnace repairs, especially those involving gas lines or major component replacement. Your contractor should handle the permit and inspection.
Get a furnace repair quote.
No heat? Compare licensed local pros fast.