Furnace Repair in Coral Springs
Get fast, fair pricing from licensed local pros. Typical Coral Springs cost: $95 – $300 installed.
- Flame sensor
- $95 – $300
- Igniter
- $175 – $550
- Blower motor
- $475 – $1.8k
- Control board
- $350 – $950
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Coral Springs repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair in Coral Springs typically costs between $95 and $4,200 depending on the part, with a diagnostic fee of $90–$250. Most homes were built around 1986, so older systems may need more frequent repairs. Because Florida's climate is hot-humid, many homes use heat pumps for heating, but gas furnaces are also present. Local codes require a mechanical permit for repairs involving refrigerant or major components, and the Florida Building Code mandates hurricane tie-downs for outdoor units. The federal 25C tax credit offers up to $2,000 for qualifying heat pumps, but not for gas furnace repairs.
- Diagnostic / service callOften credited toward the repair$90 – $250
- Flame sensor or thermocoupleCommon no-heat cause on gas units$95 – $300
- Hot-surface igniterFurnace clicks but won’t light$175 – $550
- Blower motorNo airflow / weak airflow$475 – $1,800
- Heat exchangerCracked exchanger often means replace$1,800 – $4,200+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Coral Springs
U.S. Census ACS- Households
- 53,520
- Homeowners
- 26,564
- 57% own
- Median home value
- $453,100
- Median income
- $87,488
- Median home built
- 1986
- Housing units
- 46,823
With a median home built in 1986, many Coral Springs AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Coral Springs?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Coral Springs.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Coral Springs
Given Florida’s hot-humid climate and heat-pump heating, high-seer2 heat pump is the sensible default for most Coral Springs homes. With a long, hard cooling season here, stepping up the SEER2 tier pays back through lower summer bills. A pro can confirm the right size and system for your home with a load calculation.
Sources: Duke Energy Florida HVAC Replacement Rebate · SEER2 Southeast Region Standards · EIA Florida State Energy Profile
What Coral Springs code requires
Installing or replacing an HVAC system in Coral Springs follows Florida rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum14.3 SEER2 (Southeast, <45k BTU)
Federal Southeast-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRequired (Manual J)
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Florida Building Code requires hurricane/high-wind tie-downs and anchoring for outdoor condenser/heat-pump units.
Sources: Duke Energy Florida HVAC Replacement Rebate · SEER2 Southeast Region Standards · EIA Florida State Energy Profile
Not sure which rules and rebates apply to your home?
A licensed Coral Springs pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Coral Springs
Florida heating is mostly heat-pump, which shapes the money back:
- StateUp to $1,000 (heat pump/strip-heat upgrade; $300 AC, $500 heat-pump upgrade)Duke Energy Florida HVAC Replacement Rebate →
State or utility program — verify eligibility before you buy.
- State$200 instant credit (SEER2 15.3+ via participating contractor)FPL High-Efficiency AC/Heat Pump Instant Rebate →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Coral Springs, explained.
What affects furnace repair costs in Coral Springs?
Prices vary by the part replaced: flame sensor repairs are $95–$300, while heat exchanger replacements run $1,800–$4,200+. Labor rates reflect the local median income of $87,488. Older homes (median built 1986) may have harder-to-access systems, increasing labor time. Permits add $50–$150. In hot-humid Coral Springs, heat pumps are common, so repairs often involve refrigerant (R-454B or R-32) and require EPA certification, which can raise costs.
Common furnace repairs in Coral Springs
Flame sensor failure
A dirty or faulty flame sensor prevents ignition. Typical repair cost: $95–$300.
Igniter problems
A worn igniter won't light the burner. Replacement runs $175–$550.
Blower motor issues
The blower motor may fail due to age or debris. Repair cost: $475–$1,800.
What to expect during a furnace repair in Coral Springs
A technician will first diagnose the issue for a $90–$250 fee. They'll check for permits needed (required for refrigerant or major repairs). If outdoor unit work is needed, hurricane tie-downs must be reinstalled per code. Repairs typically take 1–3 hours. After repair, the technician will test the system and provide a permit final if required.
Furnace Repair FAQs — Coral Springs
Yes, Florida requires a mechanical permit for repairs involving refrigerant, major electrical work, or replacement of components like the heat exchanger. Your contractor should pull the permit and schedule inspection.
Furnace Repair near Coral Springs
Get a furnace repair quote.
No heat? Compare licensed local pros fast.