Furnace Repair in Concord
Get fast, fair pricing from licensed local pros. Typical Concord cost: $75 – $250 installed.
- Flame sensor
- $75 – $250
- Igniter
- $150 – $425
- Blower motor
- $375 – $1.4k
- Control board
- $275 – $750
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Concord repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
In Concord, NH, furnace repair costs are shaped by the age of the typical home (built around 1971) and the cold climate. Common repairs like flame sensor replacement run $75–$250, while more complex jobs like blower motor replacement can cost $375–$1,450, plus a diagnostic fee of $70–$200. New Hampshire requires a mechanical permit for most furnace repairs, and contractors must follow state codes, including the phase-out of R-410A refrigerant. For older homes, dual-fuel systems are often recommended to handle heating demand efficiently. Local rebates from NHSaves and the federal 25C tax credit can offset costs for qualifying high-efficiency equipment.
- Diagnostic / service callOften credited toward the repair$70 – $200
- Flame sensor or thermocoupleCommon no-heat cause on gas units$75 – $250
- Hot-surface igniterFurnace clicks but won’t light$150 – $425
- Blower motorNo airflow / weak airflow$375 – $1,450
- Heat exchangerCracked exchanger often means replace$1,450 – $3,300+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Concord
U.S. Census ACS- Households
- 17,620
- Homeowners
- 10,275
- 55% own
- Median home value
- $287,600
- Median income
- $77,874
- Median home built
- 1971
- Housing units
- 18,864
With a median home built in 1971, many Concord AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Concord?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Concord.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Concord
Given New Hampshire’s cold climate and mixed heating, dual-fuel (cold-climate heat pump + gas furnace) is the sensible default for most Concord homes. The cooling season is short, so the budget is better spent on heating efficiency than on ultra-high SEER2. A pro can confirm the right size and system for your home with a load calculation.
Sources: NHSaves Heat Pumps (residential rebates) · NH Department of Energy Home Electrification & Appliance Rebates · Choose Energy NH electricity rates
What Concord code requires
Installing or replacing an HVAC system in Concord follows New Hampshire rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Cold-climate sizing matters: NHSaves rebates require cold-climate heat pumps rated for low ambient (NEEP-listed) performance, and equipment must use R-32/R-454B (R-410A no longer allowed).
Sources: NHSaves Heat Pumps (residential rebates) · NH Department of Energy Home Electrification & Appliance Rebates · Choose Energy NH electricity rates
Not sure which rules and rebates apply to your home?
A licensed Concord pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Concord
New Hampshire heating is mostly mixed, which shapes the money back:
- State$250 per ton, up to $1,250NHSaves Cold-Climate Heat Pump Rebate (standard tier, switching from oil/gas/propane) →
State or utility program — verify eligibility before you buy.
- State$750 (UEF 2.0+)NHSaves Heat Pump Water Heater Rebate →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including New Hampshire.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Concord, explained.
What affects furnace repair costs in Concord?
Prices vary by the part needed—flame sensors are more affordable than heat exchangers ($1,450–$3,300+). Labor rates reflect the local market and the need for permits (typically $50–$150). Older homes may have harder-to-access ductwork or outdated electrical systems, increasing labor time. Cold-climate sizing also matters: repairs on systems not rated for low ambient temperatures may require additional adjustments. Finally, choosing a dual-fuel setup can affect repair complexity and cost.
Common furnace repairs in Concord
Igniter failure
The igniter wears out over time, especially in older furnaces. Replacement typically costs $150–$425.
Blower motor issues
A faulty blower motor can reduce airflow and efficiency. Repair or replacement runs $375–$1,450.
Heat exchanger cracks
Cracks from thermal stress can leak carbon monoxide. This is a critical repair costing $1,450–$3,300+.
Furnace Repair FAQs — Concord
Yes, New Hampshire requires a mechanical permit for most furnace repairs or replacements. Your contractor should handle the permit and inspection.
Furnace Repair near Concord
Get a furnace repair quote.
No heat? Compare licensed local pros fast.