Furnace Repair in Boerne
Get fast, fair pricing from licensed local pros. Typical Boerne cost: $70 – $225 installed.
- Flame sensor
- $70 – $225
- Igniter
- $125 – $400
- Blower motor
- $350 – $1.4k
- Control board
- $275 – $700
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Boerne repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
In Boerne, Texas, furnace repair costs vary based on the issue and local labor rates. Typical repairs include flame sensor replacement ($70–$225), igniter replacement ($125–$400), blower motor replacement ($350–$1,350), control board replacement ($275–$700), and heat exchanger replacement ($1,350–$3,100+), plus a diagnostic fee of $65–$175. Texas requires a TDLR-licensed contractor to perform HVAC work and pull a mechanical permit. With a median home built in 2005, many furnaces are nearing 20 years old, and the hot-humid climate means heat pumps are a strong fit for both heating and cooling.
- Diagnostic / service callOften credited toward the repair$65 – $175
- Flame sensor or thermocoupleCommon no-heat cause on gas units$70 – $225
- Hot-surface igniterFurnace clicks but won’t light$125 – $400
- Blower motorNo airflow / weak airflow$350 – $1,350
- Heat exchangerCracked exchanger often means replace$1,350 – $3,100+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Boerne
U.S. Census ACS- Households
- 7,390
- Homeowners
- 4,029
- 55% own
- Median home value
- $398,500
- Median income
- $82,982
- Median home built
- 2005
- Housing units
- 7,365
With a median home built in 2005, many Boerne AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Boerne?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Boerne.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Boerne
Given Texas’s hot-humid climate and mixed heating, high-seer2 heat pump is the sensible default for most Boerne homes. With a long, hard cooling season here, stepping up the SEER2 tier pays back through lower summer bills. A pro can confirm the right size and system for your home with a load calculation.
Sources: SEER2 Southeast region standards (Texas) · Texas heat pump rebates by utility 2026 · Texas HVAC permit requirements
What Boerne code requires
Installing or replacing an HVAC system in Boerne follows Texas rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum14.3 SEER2 (Southeast, <45k BTU)
Federal Southeast-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
HVAC work must be done by a TDLR-licensed Air Conditioning & Refrigeration contractor, and the licensed contractor (not the homeowner) pulls the required mechanical permit.
Sources: SEER2 Southeast region standards (Texas) · Texas heat pump rebates by utility 2026 · Texas HVAC permit requirements
Not sure which rules and rebates apply to your home?
A licensed Boerne pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Boerne
Texas heating is mostly mixed, which shapes the money back:
- Stateup to ~$3,000 (ENERGY STAR heat pump, participating contractor)Austin Energy Home Energy Improvement / Power Saver heat pump rebate →
State or utility program — verify eligibility before you buy.
- Stateapprox $100-$275 per tonCPS Energy heat pump / high-efficiency AC rebate (SEER2 15.2+) →
State or utility program — verify eligibility before you buy.
- Stateup to ~$600 (ENERGY STAR equipment, licensed contractor)Oncor Take a Load Off Texas energy efficiency program →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Texas.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Boerne, explained.
What Affects Furnace Repair Costs in Boerne?
Repair costs in Boerne depend on the specific part needed, labor rates, and whether a permit is required. Older homes (median built 2005) may have harder-to-find parts. The hot-humid climate can cause more wear on components like blower motors. A licensed contractor must pull a permit, which adds a small fee. Choosing a heat pump for replacement may qualify for federal tax credits (up to $2,000), offsetting costs.
Common Furnace Repairs in Boerne
Flame Sensor Failure
A dirty or faulty flame sensor can cause the furnace to shut off after ignition. Cleaning or replacing it costs $70–$225.
Igniter Problems
A cracked or worn igniter prevents the furnace from lighting. Replacement runs $125–$400.
Blower Motor Malfunction
A failing blower motor reduces airflow and efficiency. Repair or replacement costs $350–$1,350.
Furnace Repair FAQs — Boerne
Yes, Texas requires a mechanical permit for most furnace repairs. A TDLR-licensed contractor must pull the permit—homeowners cannot do it themselves.
Get a furnace repair quote.
No heat? Compare licensed local pros fast.