Furnace Repair in New Braunfels
Get fast, fair pricing from licensed local pros. Typical New Braunfels cost: $85 – $275 installed.
- Flame sensor
- $85 – $275
- Igniter
- $150 – $475
- Blower motor
- $425 – $1.6k
- Control board
- $325 – $850
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical New Braunfels repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
In New Braunfels, furnace repair costs vary based on the specific issue and the age of your system. With many homes built around 2004, common repairs include flame sensors ($85–$275), igniters ($150–$475), and blower motors ($425–$1,600). A diagnostic fee of $80–$225 is typical. Given the hot-humid climate and mixed heating needs, a heat pump is often a well-suited choice. All work must be performed by a TDLR-licensed contractor who pulls the required mechanical permit.
- Diagnostic / service callOften credited toward the repair$80 – $225
- Flame sensor or thermocoupleCommon no-heat cause on gas units$85 – $275
- Hot-surface igniterFurnace clicks but won’t light$150 – $475
- Blower motorNo airflow / weak airflow$425 – $1,600
- Heat exchangerCracked exchanger often means replace$1,600 – $3,700+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in New Braunfels
U.S. Census ACS- Households
- 37,197
- Homeowners
- 23,020
- 59% own
- Median home value
- $290,800
- Median income
- $85,827
- Median home built
- 2004
- Housing units
- 39,092
With a median home built in 2004, many New Braunfels AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in New Braunfels?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about New Braunfels.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for New Braunfels
Given Texas’s hot-humid climate and mixed heating, high-seer2 heat pump is the sensible default for most New Braunfels homes. With a long, hard cooling season here, stepping up the SEER2 tier pays back through lower summer bills. A pro can confirm the right size and system for your home with a load calculation.
Sources: SEER2 Southeast region standards (Texas) · Texas heat pump rebates by utility 2026 · Texas HVAC permit requirements
What New Braunfels code requires
Installing or replacing an HVAC system in New Braunfels follows Texas rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum14.3 SEER2 (Southeast, <45k BTU)
Federal Southeast-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
HVAC work must be done by a TDLR-licensed Air Conditioning & Refrigeration contractor, and the licensed contractor (not the homeowner) pulls the required mechanical permit.
Sources: SEER2 Southeast region standards (Texas) · Texas heat pump rebates by utility 2026 · Texas HVAC permit requirements
Not sure which rules and rebates apply to your home?
A licensed New Braunfels pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in New Braunfels
Texas heating is mostly mixed, which shapes the money back:
- Stateup to ~$3,000 (ENERGY STAR heat pump, participating contractor)Austin Energy Home Energy Improvement / Power Saver heat pump rebate →
State or utility program — verify eligibility before you buy.
- Stateapprox $100-$275 per tonCPS Energy heat pump / high-efficiency AC rebate (SEER2 15.2+) →
State or utility program — verify eligibility before you buy.
- Stateup to ~$600 (ENERGY STAR equipment, licensed contractor)Oncor Take a Load Off Texas energy efficiency program →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Texas.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in New Braunfels, explained.
What Affects Furnace Repair Costs in New Braunfels
Prices depend on the part needed and labor time. For example, a flame sensor is relatively affordable, while a heat exchanger replacement can run $1,600–$3,700+. The age of your furnace (median 22 years) may make repairs more involved. Permit fees and the contractor's licensing requirements also factor in. Choosing a heat pump for replacement can qualify for federal 25C tax credits (up to $2,000).
Common Furnace Repairs in New Braunfels
Flame Sensor Failure
A dirty or faulty flame sensor prevents the burner from staying lit. Cleaning or replacement costs $85–$275.
Igniter Problems
A broken igniter won't spark to light the gas. Replacement runs $150–$475.
Blower Motor Issues
The blower motor circulates air; failure leads to no heat. Repair or replacement costs $425–$1,600.
What to Expect During a Furnace Repair
A TDLR-licensed contractor will diagnose the issue, provide an upfront estimate, and pull the required mechanical permit. Repairs typically take 1–3 hours. For older units, they may recommend a heat pump replacement to improve efficiency and qualify for federal tax credits.
Furnace Repair FAQs — New Braunfels
Yes, a mechanical permit is required. Your contractor must pull it through the city or county, which adds a small fee to the job.
Furnace Repair near New Braunfels
Get a furnace repair quote.
No heat? Compare licensed local pros fast.