Furnace Repair in Orem
Get fast, fair pricing from licensed local pros. Typical Orem cost: $85 – $250 installed.
- Flame sensor
- $85 – $250
- Igniter
- $150 – $475
- Blower motor
- $425 – $1.6k
- Control board
- $300 – $850
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Orem repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair in Orem typically costs between $85 and $3,600+, depending on the component. A diagnostic fee of $75–$200 is standard. Orem's median home was built in 1987, so many furnaces are nearing or past their 20-year lifespan. Utah requires a mechanical permit for furnace work, and load calculations are recommended to ensure proper sizing for the cold-dry high-desert climate. Most homes use gas furnaces, and pairing with a heat pump can qualify for the Rocky Mountain Power Wattsmart rebate, though a cold-climate model is required.
- Diagnostic / service callOften credited toward the repair$75 – $200
- Flame sensor or thermocoupleCommon no-heat cause on gas units$85 – $250
- Hot-surface igniterFurnace clicks but won’t light$150 – $475
- Blower motorNo airflow / weak airflow$425 – $1,550
- Heat exchangerCracked exchanger often means replace$1,550 – $3,600+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Orem
U.S. Census ACS- Households
- 38,840
- Homeowners
- 18,113
- 57% own
- Median home value
- $392,900
- Median income
- $77,568
- Median home built
- 1987
- Housing units
- 31,967
With a median home built in 1987, many Orem AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Orem?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Orem.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Orem
Given Utah’s cold-dry climate and gas heating, high-seer2 ac + gas furnace is the sensible default for most Orem homes. A pro can confirm the right size and system for your home with a load calculation.
Sources: Rocky Mountain Power - Savings & Energy Choices for Homes (Wattsmart) · SEER2 North Region efficiency standards · EIA Utah electricity profile
What Orem code requires
Installing or replacing an HVAC system in Orem follows Utah rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Cold-dry high-desert climate: equipment should be sized for hard winter heating loads, and a cold-climate (NEEP-listed) heat pump is required to earn the top Rocky Mountain Power Wattsmart rebate.
Sources: Rocky Mountain Power - Savings & Energy Choices for Homes (Wattsmart) · SEER2 North Region efficiency standards · EIA Utah electricity profile
Not sure which rules and rebates apply to your home?
A licensed Orem pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Orem
Utah heating is mostly gas, which shapes the money back:
- StateUp to $2,000 (cold-climate/NEEP-listed unit)Rocky Mountain Power Wattsmart Homes - Heat Pump →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, though it is set to expire after 2025.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Orem, explained.
Why furnace repair costs vary in Orem
Labor rates, part costs, and permit fees influence the final price. Older homes (median built 1987) may have outdated systems requiring more labor. The specific component—flame sensor ($85–$250) vs. heat exchanger ($1,550–$3,600+)—drives the range. Utah's permit requirement adds a small fee. Seasonal demand in winter can also affect availability and pricing.
Common furnace issues in Orem
Flame sensor failure
A dirty or faulty flame sensor is a frequent cause of short cycling, especially in older furnaces.
Igniter problems
The igniter can wear out over time, preventing the furnace from lighting. Repair costs $150–$475.
Blower motor issues
A failing blower motor reduces airflow and heating efficiency. Replacement runs $425–$1,550.
What to expect during a furnace repair in Orem
A technician will first diagnose the issue for a fee of $75–$200. They will check the furnace, identify the faulty part, and provide an upfront cost estimate. If you approve, they will obtain the required mechanical permit and complete the repair. The job typically takes 1–3 hours, depending on the component.
Furnace Repair FAQs — Orem
Yes, Utah requires a mechanical permit for furnace repairs that involve replacing major components or the entire unit. Your contractor should handle the permit.
Get a furnace repair quote.
No heat? Compare licensed local pros fast.