Furnace Repair in Provo
Get fast, fair pricing from licensed local pros. Typical Provo cost: $85 – $275 installed.
- Flame sensor
- $85 – $275
- Igniter
- $150 – $475
- Blower motor
- $425 – $1.6k
- Control board
- $325 – $850
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Provo repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair in Provo, Utah, typically costs between $80 and $200 for a diagnostic fee, with common repairs like flame sensor replacement ranging from $85 to $275, igniter replacement from $150 to $475, and blower motor replacement from $425 to $1,600. Because most homes were built around 1981 and many are rentals (homeownership rate 36.9%), older furnaces may need more frequent repairs. Utah requires a mechanical permit for furnace work, which can add to the cost. The cold-dry high-desert climate means heating loads are significant, so proper sizing and maintenance are important. Many homes use gas furnaces, and a gas furnace with a heat pump is a recommended system for efficiency and comfort.
- Diagnostic / service callOften credited toward the repair$80 – $200
- Flame sensor or thermocoupleCommon no-heat cause on gas units$85 – $275
- Hot-surface igniterFurnace clicks but won’t light$150 – $475
- Blower motorNo airflow / weak airflow$425 – $1,600
- Heat exchangerCracked exchanger often means replace$1,600 – $3,700+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Provo
U.S. Census ACS- Households
- 45,760
- Homeowners
- 12,957
- 37% own
- Median home value
- $391,500
- Median income
- $57,943
- Median home built
- 1981
- Housing units
- 35,079
With a median home built in 1981, many Provo AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Provo?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Provo.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Provo
Given Utah’s cold-dry climate and gas heating, high-seer2 ac + gas furnace is the sensible default for most Provo homes. A pro can confirm the right size and system for your home with a load calculation.
Sources: Rocky Mountain Power - Savings & Energy Choices for Homes (Wattsmart) · SEER2 North Region efficiency standards · EIA Utah electricity profile
What Provo code requires
Installing or replacing an HVAC system in Provo follows Utah rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Cold-dry high-desert climate: equipment should be sized for hard winter heating loads, and a cold-climate (NEEP-listed) heat pump is required to earn the top Rocky Mountain Power Wattsmart rebate.
Sources: Rocky Mountain Power - Savings & Energy Choices for Homes (Wattsmart) · SEER2 North Region efficiency standards · EIA Utah electricity profile
Not sure which rules and rebates apply to your home?
A licensed Provo pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Provo
Utah heating is mostly gas, which shapes the money back:
- StateUp to $2,000 (cold-climate/NEEP-listed unit)Rocky Mountain Power Wattsmart Homes - Heat Pump →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, though it is set to expire after 2025.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Provo, explained.
What Affects Furnace Repair Costs in Provo
Repair costs in Provo vary based on the part needed, labor rates, and permit fees. Older homes (median built 1981) may have harder-to-access systems or outdated components, increasing labor time. The type of repair—such as a simple flame sensor versus a heat exchanger replacement ($1,600–$3,700+)—drives the price. Utah's permit requirement adds a small fee. Seasonal demand in winter can also affect availability and pricing.
Common Furnace Problems in Provo
Flame Sensor Failure
A dirty or faulty flame sensor is a frequent issue in Provo's dry climate, causing the furnace to shut off after ignition.
Igniter Problems
The igniter can crack or wear out over time, especially in older furnaces, preventing the burner from lighting.
Blower Motor Malfunction
Blower motors may fail due to dust buildup or age, reducing airflow and heating efficiency.
What to Expect During a Furnace Repair
A technician will first diagnose the issue, charging a flat fee ($80–$200). After identifying the problem, they will provide a cost estimate for the repair, including parts and labor. If a permit is required, they will handle that. Repairs typically take 1–3 hours, depending on complexity. For older systems, the technician may recommend replacement if repairs are costly.
Furnace Repair FAQs — Provo
Yes, Utah requires a mechanical permit for most furnace repairs involving gas or electrical work. Your contractor should obtain the permit, which adds a small fee to the total cost.
Get a furnace repair quote.
No heat? Compare licensed local pros fast.