Furnace Repair in Salt Lake City
Get fast, fair pricing from licensed local pros. Typical Salt Lake City cost: $90 – $275 installed.
- Flame sensor
- $90 – $275
- Igniter
- $175 – $500
- Blower motor
- $450 – $1.7k
- Control board
- $350 – $900
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Salt Lake City repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair in Salt Lake City typically costs between $85 and $225 for a diagnostic visit, with common repairs like flame sensor replacement ranging from $90 to $275 and igniter replacement from $175 to $500. Because most homes were built around 1962 and many use gas heating, older furnaces often need blower motor ($450–$1,700) or heat exchanger ($1,700–$4,000+) repairs. Utah requires a mechanical permit for furnace work, and the cold-dry high-desert climate means equipment must be sized for hard winter heating loads. Many homeowners pair a gas furnace with a cold-climate heat pump to qualify for the Rocky Mountain Power Wattsmart rebate.
- Diagnostic / service callOften credited toward the repair$85 – $225
- Flame sensor or thermocoupleCommon no-heat cause on gas units$90 – $275
- Hot-surface igniterFurnace clicks but won’t light$175 – $500
- Blower motorNo airflow / weak airflow$450 – $1,700
- Heat exchangerCracked exchanger often means replace$1,700 – $4,000+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Salt Lake City
U.S. Census ACS- Households
- 80,508
- Homeowners
- 40,132
- 43% own
- Median home value
- $458,600
- Median income
- $72,357
- Median home built
- 1962
- Housing units
- 93,105
With a median home built in 1962, many Salt Lake City AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Salt Lake City?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Salt Lake City.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Salt Lake City
Given Utah’s cold-dry climate and gas heating, high-seer2 ac + gas furnace is the sensible default for most Salt Lake City homes. A pro can confirm the right size and system for your home with a load calculation.
Sources: Rocky Mountain Power - Savings & Energy Choices for Homes (Wattsmart) · SEER2 North Region efficiency standards · EIA Utah electricity profile
What Salt Lake City code requires
Installing or replacing an HVAC system in Salt Lake City follows Utah rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Cold-dry high-desert climate: equipment should be sized for hard winter heating loads, and a cold-climate (NEEP-listed) heat pump is required to earn the top Rocky Mountain Power Wattsmart rebate.
Sources: Rocky Mountain Power - Savings & Energy Choices for Homes (Wattsmart) · SEER2 North Region efficiency standards · EIA Utah electricity profile
Not sure which rules and rebates apply to your home?
A licensed Salt Lake City pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Salt Lake City
Utah heating is mostly gas, which shapes the money back:
- StateUp to $2,000 (cold-climate/NEEP-listed unit)Rocky Mountain Power Wattsmart Homes - Heat Pump →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, though it is set to expire after 2025.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Salt Lake City, explained.
What affects furnace repair costs in Salt Lake City?
Labor rates reflect the local median income of $72,357 and the need for licensed technicians. Permit fees in Utah add to the total. The age of homes (median built 1962) means older systems may require more labor-intensive repairs, especially for heat exchangers or control boards. The cold-dry climate demands proper sizing for heating loads, which can increase diagnostic time. Choosing a high-efficiency system may qualify for the federal 25C tax credit (30% up to $2,000 for heat pumps) but does not lower repair costs.
Common furnace repairs in Salt Lake City
Flame sensor failure
A dirty or faulty flame sensor is common in older furnaces, causing the burner to shut off after a few seconds. Replacement typically costs $90–$275.
Igniter problems
The igniter can crack or wear out, preventing the furnace from lighting. Repair costs range from $175 to $500.
Blower motor issues
A failing blower motor reduces airflow or stops heating. Replacement runs $450–$1,700, often needed in homes with older ductwork.
What to expect during a furnace repair in Salt Lake City
A technician will first diagnose the issue, charging $85–$225. They will check the permit requirements and may need to pull a mechanical permit from the city. Repairs are typically completed in one visit, but heat exchanger or blower motor replacements may take longer. After repair, the technician will test the system to ensure it handles the cold-dry climate's heating demands.
Furnace Repair FAQs — Salt Lake City
Yes, Utah requires a mechanical permit for most furnace repairs, including replacing major components like the heat exchanger or blower motor. Your contractor should handle the permit and inspection.
Furnace Repair near Salt Lake City
Get a furnace repair quote.
No heat? Compare licensed local pros fast.