Furnace Repair in Woods Cross
Get fast, fair pricing from licensed local pros. Typical Woods Cross cost: $75 – $225 installed.
- Flame sensor
- $75 – $225
- Igniter
- $150 – $425
- Blower motor
- $375 – $1.4k
- Control board
- $275 – $750
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Woods Cross repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair in Woods Cross, Utah, typically costs between $75 and $3,300 depending on the component. The median home was built in 1994, so many furnaces are nearing or past their expected lifespan. Local labor rates reflect the area's median income of $101,742, and a diagnostic fee of $70–$175 is standard. Utah requires a mechanical permit for most repairs, which adds to the total cost. The cold-dry high-desert climate means heating loads are significant, so proper sizing is critical. Most homes use gas furnaces, and a gas furnace with a high-efficiency AC is a common system choice.
- Diagnostic / service callOften credited toward the repair$70 – $175
- Flame sensor or thermocoupleCommon no-heat cause on gas units$75 – $225
- Hot-surface igniterFurnace clicks but won’t light$150 – $425
- Blower motorNo airflow / weak airflow$375 – $1,400
- Heat exchangerCracked exchanger often means replace$1,400 – $3,300+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Woods Cross
U.S. Census ACS- Households
- 4,573
- Homeowners
- 2,779
- 78% own
- Median home value
- $419,300
- Median income
- $101,742
- Median home built
- 1994
- Housing units
- 3,545
With a median home built in 1994, many Woods Cross AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Woods Cross?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Woods Cross.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Woods Cross
Given Utah’s cold-dry climate and gas heating, high-seer2 ac + gas furnace is the sensible default for most Woods Cross homes. A pro can confirm the right size and system for your home with a load calculation.
Sources: Rocky Mountain Power - Savings & Energy Choices for Homes (Wattsmart) · SEER2 North Region efficiency standards · EIA Utah electricity profile
What Woods Cross code requires
Installing or replacing an HVAC system in Woods Cross follows Utah rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Cold-dry high-desert climate: equipment should be sized for hard winter heating loads, and a cold-climate (NEEP-listed) heat pump is required to earn the top Rocky Mountain Power Wattsmart rebate.
Sources: Rocky Mountain Power - Savings & Energy Choices for Homes (Wattsmart) · SEER2 North Region efficiency standards · EIA Utah electricity profile
Not sure which rules and rebates apply to your home?
A licensed Woods Cross pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Woods Cross
Utah heating is mostly gas, which shapes the money back:
- StateUp to $2,000 (cold-climate/NEEP-listed unit)Rocky Mountain Power Wattsmart Homes - Heat Pump →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, though it is set to expire after 2025.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Woods Cross, explained.
Why repair costs vary in Woods Cross
Costs depend on the failed part: a flame sensor ($75–$225) is more affordable than a blower motor ($375–$1,400) or heat exchanger ($1,400–$3,300+). Labor rates are consistent, but permit fees and the need for load calculations can add $100–$300. Older homes (built before 1994) may have harder-to-access systems, increasing labor time. Emergency or after-hours service also raises the price.
Common furnace issues in Woods Cross
Flame sensor failure
A dirty or faulty flame sensor causes the furnace to shut off after ignition. Cleaning or replacing it costs $75–$225.
Igniter problems
A cracked or worn igniter prevents the furnace from lighting. Replacement runs $150–$425.
Blower motor malfunction
A failing blower motor reduces airflow and heating efficiency. Repair or replacement costs $375–$1,400.
Furnace Repair FAQs — Woods Cross
Yes, Utah requires a mechanical permit for most furnace repairs. Your contractor should include permit fees in the estimate.
Get a furnace repair quote.
No heat? Compare licensed local pros fast.