HVAC Near You
Call
Furnace Repair · Near Me

Furnace Repair in Smithfield

Get fast, fair pricing from licensed local pros. Typical Smithfield cost: $75 – $225 installed.

Licensed & insured Upfront pricing Same-day service
Flame sensor
$75 – $225
Igniter
$125 – $400
Blower motor
$375 – $1.4k
Control board
$275 – $750
0%sizing
Dialing inStep 1 of 3
Instant cost estimate

What's going on with your HVAC system?

  • Licensed
    & fully insured
  • Same-day
    service available
  • Upfront
    pricing, no pressure
  • Local
    pros, nationwide
Smithfield pricing

Furnace repair cost by part.

Typical Smithfield repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.

Furnace repair in Smithfield, Utah, typically costs between $75 and $3,200+, depending on the part and labor. With a median home age of about 30 years, many furnaces are due for service. Local diagnostic fees run $70–$175, and Utah requires a mechanical permit for repairs. The cold-dry high-desert climate means heating loads are significant, so proper sizing is critical. Most homes use gas furnaces, and a gas furnace with a heat pump is a recommended system for efficiency.

  • Diagnostic / service call
    Often credited toward the repair
    $70 – $175
  • Flame sensor or thermocouple
    Common no-heat cause on gas units
    $75 – $225
  • Hot-surface igniter
    Furnace clicks but won’t light
    $125 – $400
  • Blower motor
    No airflow / weak airflow
    $375 – $1,350
  • Heat exchanger
    Cracked exchanger often means replace
    $1,350 – $3,200+

* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.

Pricing reviewed · Local data from U.S. Census ACS

HVAC systems in Smithfield

U.S. Census ACS
Households
5,463
Homeowners
3,128
78% own
Median home value
$359,600
Median income
$87,175
Median home built
1996
Housing units
4,030

With a median home built in 1996, many Smithfield AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.

Talk to a local pro

Ready to get your HVAC system serviced in Smithfield?

Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.

  • Licensed & insured
  • Same-day availability
  • Upfront, no-pressure pricing
  • Local pros near you
Call now: (855) 321-3116

No obligation — talk through your options.

Licensed technician servicing an HVAC system
Local guide · Smithfield

What’s different about Smithfield.

Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.

Recommended unit for Smithfield

High-SEER2 AC + gas furnace

Given Utah’s cold-dry climate and gas heating, high-seer2 ac + gas furnace is the sensible default for most Smithfield homes. A pro can confirm the right size and system for your home with a load calculation.

Sources: Rocky Mountain Power - Savings & Energy Choices for Homes (Wattsmart) · SEER2 North Region efficiency standards · EIA Utah electricity profile

What Smithfield code requires

Installing or replacing an HVAC system in Smithfield follows Utah rules under the state mechanical code. Here’s what applies statewide:

  • Permit

    Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.

    Required
  • SEER2 minimum

    Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.

    13.4 SEER2 (North)
  • Load calculation

    Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.

    Recommended
  • Refrigerant
    R-454B / R-32 (R-410A phased down 2025+)
  • Good to know

    Cold-dry high-desert climate: equipment should be sized for hard winter heating loads, and a cold-climate (NEEP-listed) heat pump is required to earn the top Rocky Mountain Power Wattsmart rebate.

Sources: Rocky Mountain Power - Savings & Energy Choices for Homes (Wattsmart) · SEER2 North Region efficiency standards · EIA Utah electricity profile

Talk to a local pro

Not sure which rules and rebates apply to your home?

A licensed Smithfield pro will walk you through code, the right unit, and what you can claim back — in one quick call.

Call now: (855) 321-3116

No obligation — talk through your options.

Money back in Smithfield

Utah heating is mostly gas, which shapes the money back:

The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, though it is set to expire after 2025.

How it works

Comfort back in three steps.

  1. 1

    Tell us what’s wrong

    Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.

  2. 2

    Get matched with a local pro

    We connect you with a licensed, insured HVAC technician near you — often the same day.

  3. 3

    Repair or replace, fast

    Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.

Local insight · Smithfield

Furnace Repair in Smithfield, explained.

What moves the price

What Affects Furnace Repair Costs in Smithfield

Prices vary by part: flame sensor $75–$225, igniter $125–$400, blower motor $375–$1,350, control board $275–$750, heat exchanger $1,350–$3,200+. Labor rates reflect the local market, and permit fees add to the total. Older homes (median built 1996) may have harder-to-access systems. The cold climate demands reliable repairs, and using a NEEP-listed heat pump can qualify for Rocky Mountain Power Wattsmart rebates, though rebate amounts are not specified here.

Common Furnace Repairs in Smithfield

1

Flame Sensor Failure

A dirty or faulty flame sensor can cause the furnace to shut off after ignition. Cleaning or replacement costs $75–$225.

2

Igniter Problems

A cracked or worn igniter prevents the furnace from lighting. Replacement runs $125–$400.

3

Blower Motor Issues

A failing blower motor reduces airflow and heating efficiency. Repair or replacement costs $375–$1,350.

FAQ

Furnace Repair FAQs — Smithfield

Yes, Utah requires a mechanical permit for furnace repairs. Your contractor should handle the permit, which adds to the total cost.

Furnace Repair near Smithfield

Get a furnace repair quote.

No heat? Compare licensed local pros fast.

(855) 321-3116 Available now · Same-day service
Call now: (855) 321-3116

Upfront pricing Same-day Licensed