Furnace Repair in Manitowoc
Get fast, fair pricing from licensed local pros. Typical Manitowoc cost: $70 – $225 installed.
- Flame sensor
- $70 – $225
- Igniter
- $125 – $400
- Blower motor
- $350 – $1.3k
- Control board
- $275 – $700
What's going on with your HVAC system?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Furnace repair cost by part.
Typical Manitowoc repair pricing including parts and labor. A diagnostic fee usually applies and is often credited toward the work.
Furnace repair in Manitowoc, Wisconsin, typically costs between $150 and $3,100+, depending on the component. With a median home age of 68 years, many homes have older furnaces that may need repairs like flame sensor or heat exchanger replacement. Wisconsin requires a mechanical permit and a licensed DSPS contractor for all furnace work, including like-for-like changeouts. The cold climate means equipment must be sized for severe winter design temperatures, and most homes use gas heating. A typical diagnostic fee ranges from $65 to $175. For homeowners considering replacement, a gas furnace with central AC is recommended, and the federal 25C tax credit offers up to $600 for high-efficiency AC or up to $2,000 for a heat pump.
- Diagnostic / service callOften credited toward the repair$65 – $175
- Flame sensor or thermocoupleCommon no-heat cause on gas units$70 – $225
- Hot-surface igniterFurnace clicks but won’t light$125 – $400
- Blower motorNo airflow / weak airflow$350 – $1,300
- Heat exchangerCracked exchanger often means replace$1,300 – $3,100+
* A cracked heat exchanger is a safety issue — on an older furnace, replacement is usually the call.
Pricing reviewed · Local data from U.S. Census ACS
HVAC systems in Manitowoc
U.S. Census ACS- Households
- 13,800
- Homeowners
- 9,540
- 59% own
- Median home value
- $134,900
- Median income
- $60,040
- Median home built
- 1958
- Housing units
- 16,221
With a median home built in 1958, many Manitowoc AC and furnace systems are at or past their 12–15 year lifespan — a common reason replacements spike here.
Ready to get your HVAC system serviced in Manitowoc?
Speak with a licensed, insured HVAC technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What’s different about Manitowoc.
Generic cost pages skip the things that actually decide your price and which system fits here — local code, climate, and the money you can claim back.
Recommended unit for Manitowoc
Given Wisconsin’s cold climate and gas heating, high-seer2 ac + gas furnace is the sensible default for most Manitowoc homes. The cooling season is short, so the budget is better spent on heating efficiency than on ultra-high SEER2. A pro can confirm the right size and system for your home with a load calculation.
Sources: Focus on Energy - Residential Heating & Cooling · Wisconsin DSPS HVAC Contractor / mechanical permitting · EIA Wisconsin Electricity Profile
What Manitowoc code requires
Installing or replacing an HVAC system in Manitowoc follows Wisconsin rules under the state mechanical code. Here’s what applies statewide:
- PermitRequired
Mechanical permit pulled by your licensed HVAC contractor; covers equipment, refrigerant, and the electrical disconnect.
- SEER2 minimum13.4 SEER2 (North)
Federal North-region minimum for new split-system AC. Higher tiers cut bills and unlock rebates.
- Load calculationRecommended
Sizing by load calc — not rule of thumb — prevents an oversized unit that short-cycles and never dehumidifies.
- RefrigerantR-454B / R-32 (R-410A phased down 2025+)
- Good to know—
Cold-climate state: equipment must be sized for severe winter design temps; mechanical permit and a licensed Wisconsin HVAC contractor (DSPS) required even for like-for-like changeouts.
Sources: Focus on Energy - Residential Heating & Cooling · Wisconsin DSPS HVAC Contractor / mechanical permitting · EIA Wisconsin Electricity Profile
Not sure which rules and rebates apply to your home?
A licensed Manitowoc pro will walk you through code, the right unit, and what you can claim back — in one quick call.
No obligation — talk through your options.
Money back in Manitowoc
Wisconsin heating is mostly gas, which shapes the money back:
- State$400-$900 instant rebateFocus on Energy - Residential Air-Source Heat Pump Rebate →
State or utility program — verify eligibility before you buy.
- Federal30% of cost, up to $2,000Federal 25C tax credit — heat pump →
For a qualifying ENERGY STAR heat pump meeting the CEE efficiency tier. Claimed on your federal return.
- Federal30% of cost, up to $600Federal 25C tax credit — central AC →
For a qualifying high-efficiency central air conditioner.
The federal 25C tax credit (30%, up to $2,000 for a qualifying heat pump and up to $600 for a high-efficiency central AC) applies in every state, including Wisconsin.
Comfort back in three steps.
- 1
Tell us what’s wrong
Use the cost tool or call — takes 30 seconds. No cool air, no heat, or time for a new system.
- 2
Get matched with a local pro
We connect you with a licensed, insured HVAC technician near you — often the same day.
- 3
Repair or replace, fast
Your pro confirms the price on-site and gets your comfort back. Most jobs done in a few hours.
Furnace Repair in Manitowoc, explained.
What affects furnace repair costs in Manitowoc?
Repair costs vary by component: flame sensor ($70–$225), igniter ($125–$400), blower motor ($350–$1,300), control board ($275–$700), and heat exchanger ($1,300–$3,100+). Labor rates reflect the local market, and permit fees add $50–$150. Older homes (median built 1958) may have harder-to-access systems, increasing labor time. The cold climate demands reliable repairs, and licensed contractors must follow Wisconsin code, which can affect pricing.
Common furnace repairs in Manitowoc
Flame sensor failure
A dirty or faulty flame sensor prevents the furnace from staying lit. Typical repair cost: $70–$225.
Igniter problems
A cracked or worn igniter stops the furnace from starting. Repair cost ranges $125–$400.
Blower motor issues
A malfunctioning blower motor reduces airflow or causes noise. Replacement costs $350–$1,300.
Furnace Repair FAQs — Manitowoc
Yes, Wisconsin requires a mechanical permit for any furnace repair or replacement, even like-for-like. A licensed DSPS contractor must obtain the permit.
Furnace Repair near Manitowoc
Get a furnace repair quote.
No heat? Compare licensed local pros fast.